Date: 27NOV2003 Company: Goodyear Product: Wranger MT-R Model: 99 TJ Opinion: Excellent! E-mail: Marcg2000@aol.com

Details: went with the 33-12.5 R15 on a TJ with 4" lift work great in the mud and dirt and rocks good on the road also minimal wear little sound amazing traction and looks great, the bigger the better, same as the Rubicons but look better when larger

Date: 27NOV2003 Company: Spyder Customs Product: Rocker Knockers Model: 99 TJ Opinion: Excellent! E-mail: Marcg2000@aol.com

Details: look amazing very stout 1/4 inch steel covers from fender flare to fender flare use as pivot point or hi-lift jack point. easy install same price as the rest.

Date: 16NOV2003 Company: Big Wheel Offroad Product: Best 4x4 P/S in N.Carolina Model: Any make or model Opinion: Excellent! E-mail: PatriotJeep@Yahoo.com

Details: No joke, the best parts and/or service in Eastern N.Carolina is by far BIG WHEEL OFFROAD in Hubert. I've had work done at other places and wished I hadn't. If you want anything done right the first time and to be completely satisfied with the service go see Big Wheel. High Performance or add-ons, this is the place to go!!

Date: 3OCT2003 Company: Bulletproof Mfg. Product: FF1 & FF1RS Bumpers Model: 01 TJ Opinion: Excellent! E-mail: jackd0503@hotmail.com

Details: Excellent construction. Perhaps the most durable bumpers I have ever seen for a Jeep. I sat all my Jeep's weight on its rear bumper and just barely scratched the powdercoat.

Date: 25SEP2003 Company: Catco Product: Hi-Flo Cat Model: '97 Wrangler SE Opinion: Excellent! E-mail: peronibros@hotmail.com

Details: I got the hi-flo cat after already had installed Borla header, Flowmaster muff, and intake/bored TB/spacer combo. So to complete the whole exhaust system I purchased from Summit Racing the cat. I tell ya... not only does it increase the "cool" factor in the noise department, but you do get an extra kick out in accell and overall power. Definately worth the money!

Date: 25SEP2003 Company: Jeepers & Creepers Product: Bored Throttle Body & Spacer Model: '97 Wrangler SE Opinion: Excellent! E-mail: peronibros@hotmail.com

Details: Called J&C's for their bored out TB for my 2.5L Wrangler. They were great on the phone, and gave me one of their bored TB for 4 cyls....since they warned me that a 4.0 TB would make me lose some low-end torque. I installed it, and it worked great! The engine really comes alive when started, and is "snappier" in accelleration. Later I had the spacer (from Poweraid) bored out to 62mm and coupled with the new TB the combination is fantastic!

Date: 12AUG2003 Company: SuperLift Product: True Speed Model: TJ (fits all though) Opinion: Excellent! E-mail: shawn_croswell@hotmail.com

Details: Superlift TruSpeed. If you have changed tire size or gear ratioos, this is a must! I changed ratios from 3.07 to 4.11 and went from 225/75/15 tires to 285/75/16 tires at the same time. Suddenly, cruising at 60mph showed 100 on the speedo and the odometer was clocking 1.2 miles per every mile I traveled. Not good! I installed the TrueSpeed from Superlift to remedy the problem. Excellent results! An easy 1 hr iinstall by simply splicing one wire coming off the transfer case and routing the true speed to power (fuse box) and ground (body). After using SuperLifts included chart for resference, I simply dialed in my settings. First results were close but still about .08% off. A simple counterclockwise twist and my speedo and odo are almost perfect again. Highs: Easy install, works perfectly Lows: a little pricy at $165.00 Overall:Excellent! A must!

Date: 12AUG2003 Company: Banks Product: Cat-Back Exhaust Model: TJ Opinion: Excellent! E-mail: shawn_croswell@hotmail.com

Details: Excellent! However, a little loud. I don't mind but the GF doesn't like it too much. INstall was fairly easy- However, I recommend cutting the old exhaust in two for easier removal. Also, old bolts connecting to Cat Converter seemed almost welded on...were very hard to remove. Easily a three hour install if you have a sawzall to remove the old exhaust. Too new to calucualte exactly, but does seem to have opened up the Jeep a little..definately see an improvement in 4 and 5th gears. Highs: Sounds good (to me, not GF), easy install Lows: Cheesy chrome tip and clamps (I didn't use them) Overall:Highly Recommend!

Date: 28JUL2003 Company: jkS Product: JKS Quicker Disconnects Model: 1997TJ Opinion: Excellent! E-mail: kevindawnj@cs.com

Details: Had to buy something as factory sway bar connectors were shot, so I decided to go with JKS as they seemed higher quality and got raves online. Easy to install besides knocking the sway bar bolt out. Ride is excellent and quiet, and they disconnect and connect (after initial adjustment) in a snap. Look at the difference in the build of these before you buy discos. They are the best.

Date: 22JUL2003 Company: Powertrax Product: Lockright lockers Model: CJ7 Opinion: Excellent! E-mail: idletarget@cs.com

Details: Installed them early last year and feel confident after a year and a half to give these two thumbs up. They operate flawlessly, incresase perforkmance tremendously, and the best part is they are cheap and extremely easy to install with minimal tools, time, and mechanical ability.

Date: 12JUL2003 Company: Rancho Product: 2.5" lift Model: cj-2A Opinion: Excellent! E-mail: Axion66509@aol.com

Details: I was very unsure about getting a lift for such an old jeep, but once i got the springs, all i had to do was get the shackle bushing out of the spring (to use the stock C-shackle)(even though they said it wouldnt work and i hade to buy H-shackles.. yeah right, the C-shackle worked just fine. AS well i did alittle grinding to the sides to fit it into the main-eye mount. I was very impressed i think it gave me more then a 2.5 inch lift but i am okay with that. Very cheap and very good suspension.

Date: 20MAY2003 Company: Airaid Product: Airaid Intake Model: 2002 Wrangler Opinion: Excellent! E-mail: mepierre@yahoo.com

Details: Installed quick and easy. Great power upgrade. Noticed more horse power instantly

Date: 21APR2003 Company: superlift Product: superlift 4 inch lift Model: 4 inch lift Opinion: Excellent! E-mail: jetskier@kellnet.com

Details: I just got it all buttoned up and the ride is awsome. I was really surprised when i drove it . Everyone told me that it would ride rough and that wasn't the case at all . I'm very pleased with this kit i would recomend it to anyone.

Date: 23APR2003 Company: Superior Axle and Gear Product: Super 35 Axle Kit Model: 1989 YJ Opinion: Excellent! E-mail: rcgspears@earthlink.net

Details: Installation is easy. I Drove with the new axles and Detroit locker for 8 months without any problems. Then I was involved in an accident - direct side impact to my right rear tire. I was hit hard, flipped me over. One axle was broken and the other was bent. No damage to the locker. I contacted Superior Axle and Gear to find out how to buy replacement axles and they sent me new axles FREE - still under warranty they said. They not only sent the axles free but they sent new bearings and seals too. Outstanding customer service.

Date: 1MAY2003 Company: Full Traction Product: Shackel Reverse Kit Model: 1992 Wrangler Opinion: Excellent! E-mail: steveyos@yahoo.com

Details: Easy to install with some basic skills and common sence, did in aprox 4 hours. Instructions could have been better. Hardest part was removing rear stock shackels becouse bolts hit gas tank. Improved ride only other nessesary mod was new Pro Comp 3000 Shocks. Have had on for four months with no problems.

Date: 17APR2003 Company: High-Tec-Retreading.com Product: OTR Mud Tires Model: 31x10.50R15LT Opinion: Excellent! E-mail: DEBFlounder3@aol.com

Details: I bought these to replace a set I've been using for 5 years. They have excellent road manners, great traction on rocks, and clear well in the mud. Since they only cost one third as much, feel free to put them at risk in extreme conditions.

Date: 9MAR2003 Company: bf goodrich Product: alterrain t/a Model: 285 75r Opinion: Excellent! E-mail: stratcie@yahoo.ca

Details: Very nice running tire both on and off road.

Date: 26FEB2003 Company: Backcountry Engineering Product: Backcountry Rack Model: N/A Opinion: Excellent! E-mail: boldhomer@hotmail.com

Details: I've used on of these receiver racks for years to get some extra storage on my Jeep, especially during the deer hunt, but I always bent the crap out of them cause their so low to the ground. Well, I came across this company called Backcountry Engineering and they took a receiver rack and stuck a pair of receiver tubes on the tire swing. It sat about 3ft off the ground on a semi-stck YJ, much higher than other receiver racks. But the really cool part is the rack swings out with the tire carrier giving me full access to the tailgate and lift hatch. I bought one and got it within a week, it bolted straight on and everything line rigght up to exsisiting holes. The bumper is this one peice of 4 x 4 tube, all the bolts are inside and hidden. Its very clean and smooth looking but I dont know if I like the caps on the end. I'll hav eto see how they hold up. The tire swing is mounted on a 2" solid rod welded into the bumper, its solid with the rack on and me jumping on the rack nothing moves or flexes or sags. I've had 300 pounds on it going down the road and it felt very solid well the rack was solid and my jeep was squirrelly. Anyway I've been very impressed with mine. They must be a pretty new company because I haven't found anywhere other than Ebay (of all places).

Date: 12FEB2003 Company: TrailReady Product: TR II Alum. Bead Locks Model: 15x10 5on5.5 Opinion: Excellent! E-mail: XJTJ@aol.com

Details: By far the best Bead Lock Wheel on the Market. I've had other wheels beadlocks, but these ROCK!!! Excellent customer service (Chris) and same day shipping. There are less expensive wheels on the market, BUT SAVE YOUR MONEY FOR THE TR'S!! I will be buying a second set here shortly.

Date: 15JAN2003 Company: Interco Tire Company Product: TrXus Tires Model: 31x10.50 Radial Opinion: Excellent! E-mail: smurfe@cox.net

Details: I have been impressed so far with my TrXus 31x10.50 radials. 10,000 miles with minimal wear. Agressive look and far better preformance than I had expected from them. They do ride a bit stiff but I have become acustomed to them, they are not a loud tire, just a nice little hum. Will probably buy again.

Date: 15JAN2003 Company: Doestch Tech Product: DT-3000 Shocks Model: N/A Opinion: Excellent! E-mail: smurfe@cox.net

Details: an excellent shock at an excellent price. Dramaticaly improved the ride of my 99 TJ. I mounted mine "can" down. When mounted "can" up they gave a "spongy" ride. I totally recomend this product.

Date: 15JAN2003 Company: Dayton Product: Timberline MT Model: 98 TJ Opinion: Excellent! E-mail: digital_aura1@hotmail.com

Details: I ordered some new Dayton Timberline MTs to replace some cheapo MTs I had before. These Dayton's are freaking awesome for the price! I ordered the 33x12.50 r15 tires. All I can say is at $125 a pop (mounted) they are worth every penny. They clean out mud and snow VERY good. They have 3 ply sidewalls and 6 ply tread. Dayton is a Bridgestone company and you can tell this tire has benefited from the more expensive tires Bridgestone offers. In my opinion there is no better bang for your buck tire out there which can complete with these. The only bad thing, it took 6 weeks to order these, since they are a new product and were on national backorder. Worth the wait though. Are these tires serious rockcrawling tires? No. But for trail usage and mild rock crawling they are great. Recommended

Date: 15JAN2003 Company: Teraflex Product: S3T Model: 98 TJ Opinion: Excellent! E-mail: digital_aura1@hotmail.com

Details: I installed the Teraflex 3" lift kit (S3T) about a year ago now. All I can say are good things about this kit. The install was straight forward, the hardward included is high quality, and the kit is very complete. The ride quality is better than stock both onroad and offroad. I have received several thumbs up from other Jeep owners and the feedback is always positive. I have Rancho 9000 shocks mounted up with the kit. I give the performance of the kit a 9 out of 10. Just because very few things are perfect in my world. :) Highly Recommended If I had to do it over again, I would go for the Teraflex 4" Long Arm kit. Just just did not have the $$ to do that the first time.

Date: 9JAN2003 Company: K&N Product: K&N Airfilter Model: TJ Opinion: Excellent! E-mail: bobaloo@comcast.net

Details: Quick & easy upgrade filter for stock air box. Performance increase and + 2mpg! Excellent value!

Date: 22DEC2002 Company: protofab Product: tj rear bumper/tire carrier Model: tj Opinion: Excellent! E-mail: tjjeeprz@aol.com

Details: the is a superior product the customer service is excellent the engineering is great with a cool cam latch totally rattle free! the instructions are clear. it is very well built. I highly recommend it for oversize tires, mine has 35's and I see no problem carrying a 37 can be custom built for different body lifts the welds look like works of art the web site pictures don't do it justice . very competively priced , mine was under$600 shipped to my door with a holiday discount hurry before it goes back to regular price.

Date: 18DEC2002 Company: Aftermarket Jeep Parts Product: Trail Quest Inc. Model: 2000 Jeep TJ Sport Opinion: Excellent! E-mail: j_fullerc141@hotmail.com

Details: I bought a Teraflex 4" Long Arm lift through Trail Quest Inc. In Plain City, Ohio. They had the best price on the lift, short shaft kit, and cv driveshaft of any company on the net or in the magazines. Very nice people to work with. Give them a try.

Date: 18DEC2002 Company: teraflex Product: 4" long arm lift kit Model: 2000 tj sport Opinion: Excellent! E-mail: j_fullerc141@hotmail.com

Details: I am very happy with my teraflex lift. It took about 12 hours to install with the help of a friend. The hardest part was grinding off the factory lower control arm mounts. Instructions are easy to follow. The quality of the whole kit is excellent. I also put in a tera short shaft kit and cv style driveshaft. My speedo gear let go after 2 weeks of driving. Tera sent me a new one within 3 days of calling them. I had installed the gear in the wrong notch. The ride is great. I am running 33x12.50x15 BFG M/T KOs. Be sure to recheck all nuts and bolts as tera recommends. Excellent kit and company. I bought the kit through Trail Quest in Plain City, Ohio.

Date: 18DEC2002 Company: Dupli Color Product: Dupli Color Bed liner Model: 90 YJ Sahara Opinion: Excellent! E-mail: virgil_likes_rum@hotmail.com

Details: Check this out before you buy more expensive brands!! I went to my local auto parts store and bought a gallon of Dupli Color truck bed liner and the installation kit. This was such an easy project to do! The hardest part is the prep work. I pulled out all the interior and seats and junk out of my jeep and rebolted all the bolts. I then cut masking tape around the bolts to ease removal after the bed liner cured. I shouldnt have even wasted my time doing that. You could just roll some tape into a cone shape and stick it in the bolt holes. I followed the directions for sanding and used acetone to remove the clear coat and any wax or gunk. I got lazy sanding though and ended up just using the scuff pad that came with the installation kit. Application was simple (the first coat should be light and just use the paint brush for this) and quick. I ended up using 2 gallons and 1 pint because I wanted it really thick. At $39 a gallon it was way cheaper than Herculiner and just as effective. Road noise has gone down (I put the carpet back in on top of the liner) and this stuff doesnt peel or scratch. If you decide to do it, be sure and buy a can of the aerosol bed liner too; its so much easier than the brush for tight corners around the roll bar and stuff.

Date: 14DEC2002 Company: M.O.R.E. Product: shackle reversal kit Model: '79 CJ-7 Opinion: Excellent! E-mail: N8LZA@HAC.ORG

Details: I installed the kit three years ago. The ride really settled down,with no more wandering on the highway. The idea is to move the spring pivot to the rear of the front leaf spring to lessen the impact on the suspension. We also installed one on a friends '92 YJ with the same results. You need to do some welding to assemble, as well as drilling into the frame. But it's worth the torn knuckles...

Date: 1DEC2002 Company: IPF Product: 868 Model: YJ Opinion: Excellent! E-mail: erc114@excite.com

Details: Excellent set of lights! Highly recommended for those of you seeking a set of driving lights they through an incredible amount of light in two distinct patterns to the side and in a spot out in front of the vehicle. Kit was complete and simple to install. Only negative I noticed is that the mouse type switch (designed for minivans and leasees afraid to drill their dashes) is for the most part useless and adds to dash clutter. I would recommend doing what I did and wiring it to a standard illuminated switch, it is easy enough. Good value and excellent performance!

Date: 30OCT2002 Company: Superswamper Product: L.T.B's Model: Tires Opinion: Excellent! E-mail: TMahan@QCIMarine.com

Details: These tires are unbeleaveable offroad. On a near straight up hill last week in Moble Al. these tires clawed to the top in wet red clay then after 3 other jeeps tried one with a better lift then mine and bigger tires then mine 35 inch mtr's none made it So after they all gave up my new 33-13.5 - 15's did it again. For the offroader who wants uncompromized traction you need to give these tires a try and at 118$ apiece they are a bargain.

Date: 26OCT2002 Company: Bell Tech Product: Lowering Shackles Model: 91 XJ Laredo Opinion: Excellent! E-mail: bass4hvn@yahoo.com

Details: These units are used to lower full-size trucks. Well Jeep didn't do it backwards like they did and the Shackles work to lift an XJ about 1.5"- 2". They are built for full-size, so they hold up well to the weight of an XJ. They can be picked up for about $30 a pair. I use my Jeep for alot of mountain driving and have none of the sway associated with "cheap" shackles. I highly recommend using these. They can also be bought in Junkyards for dirt cheap. I do recommend using poly bushings in your springs though.

Date: 26SEP2002 Company: Borla Product: Header Model: 1999 TJ 4.0 Opinion: Excellent! E-mail: marcg2000@aol.com

Details: Looks great, added power, sounds good, simple to install, fit great

Date: 17SEP2002 Company: PRO-COMP Product: 33"15X12.50 X-TERRAIN Model: 2000 TJ Opinion: Excellent! E-mail: BAMAJEEP@COMCAST.NET

Details: These tires have great ride.not to loud.good in mud.good in sand with lowered pressure.don't know about wear haven't had them long.but they seem like they be around awhile.

Date: 17SEP2002 Company: BDS SUSPENSION Product: 3"EASY RIDE LIFT Model: 2000 TJ Opinion: Excellent! E-mail: BAMAJEEP@COMCAST.NET

Details: Lift kit works great.the ride better than stock.it took 8hours to install.kit has quick disconnects links,springs,brackets,shocks and all the hardware.

Date: 8SEP2002 Company: Goodyear Product: Goodyear MTR Model: 30X9.5 Opinion: Excellent! E-mail: swaustex@yahoo.com

Details: These tires are kind of expensive, but are probably the best all around Jeep tire made. The provide excellent traction in rock, sand, and mud. They also have less road wine then a BFG AT, and ,as I've put about 10 K on them, look like they are going to last awhile. The only real drawback is they are signifigantly more expensive then the comparable BFG sizes.

Date: 29AUG2002 Company: HW Industries Product: Jamboree Racks Model: Any Jeep Opinion: Excellent! E-mail: sdf-nkf@sbcglobal.net

Details: This is truly the "ORIGINAL" Jamboree Rack. Designed and built for the Rubicon. They work and install easily.

Date: 28AUG2002 Company: Pro Comp Product: Pro Comp Xterrain Tires Model: 95 YJ 33" 12.50 Opinion: Excellent! E-mail: rdak1205@altamaha.net

Details: These tires are great. I had read an article saying these were great tires for low horsepower.I still have the 2.5 4cyl and the tires clean out with little problem.Works great in mud,sand,and most anything i have ran across.Very surprising performance running in sand.Can stay in 2wd for the most part.However,hit the throttle and they will dig.Keeping around 22 lbs of air ,they seem to flex very well.Very good ride concidering they are on a wrangler,can only imagine the ride on a truck!!! Virtually no roar on the highway.Have had these for about 6000 miles with no noticable wear.They are a directional tire so you are limited as far as rotation.Good all around tire!!!!

Date: 12AUG2002 Company: RS5000 Product: Stabilizer Model: YJ Opinion: Excellent! E-mail: erc114@excite.com

Details: Installed a RS5000 Stabilizer to replace my aging and well worn stock unit. Good install, easy fit, new hardware included. Has dramatically reduced wobble and made steering feel more consistent. Recommended.

Date: 4AUG2002 Company: Warn Product: Full Folat Axle Conversion D35 Model: N/A Opinion: Excellent! E-mail: Mark@sheltonnet.com

Details: Great install directions and Beefy product. If you bust an axle on the trail just take off the wheel and remove the axle.

Date: 13JUL2002 Company: General Tire Product: General Grabber MTs Model: 97 aTJ Opinion: Excellent! E-mail: xtygerxarmyx@aol.com

Details: I bought these awhile ago and they are wearing great. i still have about half tread after almost a full year. when i first got them i took them up to a hole i got stuck in in 4low. i went through it in 2 and didnt even spin a tire. great tires and for $92 a piece are one of the cheapest mudders out there.

Date: 29MAY2002 Company: BFGoodrich Product: Mud Terrain K/Ms Model: '01 TJ Opinion: Excellent! E-mail: lumpx3@attbi.com

Details: I bought some of the new BF Mud K/Ms for my TJ, 33"x12.5"x15s. There has not been a condition I haven't been able to get out of with these tires. Living in Colorado there are alot of different conditions tires have to put up with. Even down to 5 lbs p.s.i on the trail they do not give up. Previously I bought the BF A/T K/Os and they were good too but not as good as the Muds are on the trail. Definitely a great purchase in my book.

Date: 6MAY2002 Company: Painless Product: Painless wiring harness #10110 Model: 1982 Scrambler Opinion: Excellent! E-mail: joe@advfunds.net

Details: I am in the middle of a frame up rebuild on my CJ-8 (Scrambler). I just installed a Painless wiring harness and it was just that, PAINLESS! The only modification that I had to do was lengthen the harness for the rear lights because the kit is designed for CJ-7s. The instructions were clear and the whole project only took a couple of hours. This is a quality product.

Date: 1MAY2002 Company: Electric Life Product: Power Windows Model: 2k Opinion: Excellent! E-mail: brace@glenn-cade.com

Details: Easy to install and keep on working even in dusty West Texas weather! Cost is reasonable and it adds a nice touch to any full door Jeep.

Date: 25APR2002 Company: Warn Product: Rock Sliders Model: TJ Opinion: Excellent! E-mail: dustdriver@yahoo.com

Details: Heavier and stouter than I expected, these fit great and look great too, and offer plenty of protection for all but the heaviest of hits (the kind that will do more than just dent a rocker panel).

Date: 25APR2002 Company: O-R Fabrications, Inc. Product: TJ sport cage Model: TJ Opinion: Excellent! E-mail: dustdriver@yahoo.com

Details: Very clean design, excellent quality, good fit.

Date: 9APR2002 Company: Any Product: Jeff's 4 x 4 Model: N/A Opinion: Excellent! E-mail: jeep2deep@cs.com

Details: Jeff's 4 x 4 in Ocala, Fl. recently did some work on my TJ and I was thrilled with the job that he did. His work was flawless and the price was right. I highly recommend him to work on other people's vehicles because he did a GREAT job on mine.

Date: 3APR2002 Company: Four Wheel Drive Hardware Product: Four Wheel Drive Hardware Model: Fiberglass body Opinion: Excellent! E-mail: dpall43@aol.com

Details: I ordered my first parts from the company about seven years ago, including a new fiberglass body for my 1984 cj7. I have bought every stainless steel part available from them. Went thru suspension upgrades, lifts, engine swaps and rebuilds to carpeting. They call me when they think I ordered the wrong part or when somethings back ordered.I have had nothing but the best experience with this company on every purchase. I have kept up with this hobby, in part from my experience with Four Wheel Drive Hardware Inc. Keep up the good work guys!!

Date: 3APR2002 Company: Bestop Product: Super Soundbar Model: 89 YJ Opinion: Excellent! E-mail: silverHazel@hotmail.com

Details: This soundbar is great because its adjustable! You can either have it horizontal when you have backseat passengers, or tilt it slightly forward (30 degrees) when no ones in back for a MUCH clearer sound. I find that this position is perfect for highway driving with the top down, because the sound is directed toward the front, not toward your Jeep's floor. 70 mph, topless, with cars alongside and I could still hear the cd!! It comes with 6.5 Sony Xplodes; I use mine with Pioneer front speakers and it sounds great. The adjustable map lights are also very handy. However, this soundbar mounts differently than most - it clamps onto your center rollbar with a U-bolt - and the place that installed it for me did it incorrectly at first (but it was an easy fix), so if you get one make sure the U-bolt is in the correct position when installing it. It's more expensive than the other soundbars out there, but in my opinion it was well worth the money!!

Date: 26MAR2002 Company: BesTop Product: BesTop Oversize Tire Carrier Model: '99 TJ Opinion: Excellent! E-mail: chrisdewey@alumni.clemson.edu

Details: I love the BesTop Oversize Tire Swing!!! I had originally bought an Olympic Tire Swing, not realizing that it would block the taligate so that it could only opened half way. I have a 15x8 American Racing Kong Wheel with a 32x11.50 spare. Only being able to open the tailgate half way was okay until we got a 95 lb. Yellow Lab! I got the BesTop carrier locally for about the same as what I had originally paid for Olympic Tire Swing. The instructions were clear and accurate. It is a bit of a pain initially adjusting the tension and leveling it, but the smooth operation more than makes up for it. So far I have not had to make any further adjustments I did tighten the no-slip nuts sooner than I was told to, but that was my bad. They did not want to back off! I lost a little paint in the process, but the lack of bullet-proof paint is my only complaint and it's minor. The carrier has been absolutely silent around town, but I have yet to take it off road. I can't imagine that rock crawling will be more jarring than dring on stock springs, coil spaces and Dick Cepek shocks! It's hard to tell from the pictures, but the carrier anchors to the base of the sportbar at the top and to the body mount underneath. It's not going anywhere! Operation is also easy as the carrier moves with the tailgate. It's a lot of weight to move so you're not going to open the tailgate by pulling the latch or just give it a fling, but it swings silently. That would be awkward anyway since your wrist is between the tailgate and tire. Opening the tailgate slightly then grabbing the top of the tailgate works just fine and only requires one hand. You will have to push and pull it the entire way, as there is some resistence. Closing the tailgate can also be done with one hand, but you will want to keep your hand on the gate (or over the latch) as you close it. Otherwise the tailgate bounces back leaving it latched, but not entirely closed. Again, you get used to it and it's a simple, one-hand operation. Bottom line is that this thing was reasonably priced, easy to install (except for taking out the torx bolts at the base of the sport bar due to lots of factory paint), works well and doesn't take away from your departure angle. I would say it's an excellent product.

Date: 22MAR2002 Company: Interco Product: 31" x 9" 15 Swampers Radials Model: 97 TJ 2.5L Opinion: Excellent! E-mail: irwin_bob@hotmail.com

Details: I ordered the 31 inch per 9 inch Swamper radials. These tires are just awsome. They fit nice in the stock flares, make a beautiful lil hum between 35/40mph (music to my ears!), and handle very well. With all the engine upgrades i dont feel any difference in power, except at the green light (but then again, im not driving a 'Vette am I?). They look great too, almost no one has them in my area, and all the other jeepers look at my baby with envy... hehehehe... especially when they drive their 4.0L Saharas, and i got my little 2.5L. I highly reccomend them Got them $110 a piece, set of 5 at www.tyresinternational.com No lift was necessary, and i got to keep the stock full face wheels. jeep on! (O||||O)

Date: 2FEB2002 Company: ON_Products Product: ON_Products Underhood Hi-Lift Jack Mount for a TJ Model: 1999 Wrangler Opinion: Excellent! E-mail: Wind_Danzer@hotmail.com

Details: Another great investment, I was informed of this product by the owner of the company after asking about a good mounting location on another BB. Most of the weight of the jack is on a bracket that is installed over the battery while a second bracket is installed on the drivers side body that hold the support rod which supports the top part. Very stout and it has a good mechanism to hold the jack in place so it doesn't rattle and move around the engine compartment. The jack is hidden from view, kept clean and dry (provided you don't fly through a huge mud or water puddle) and is easily accessible. The only reason I'm not using it now is because I altered my air intake making it impossible to use.

Date: 2FEB2002 Company: Kilby Enterprises Product: Kilby Gas Tank Skid Plate Model: 1999 Wrangler Opinion: Excellent! E-mail: Wind_Danzer@hotmail.com

Details: One of the best investments I have ever made. Not only is it 3/16 steel that cover the whole exposed area on the gas tank, it is bombproof and raises the take a full inch over stock. It also has a sloped back to help with departure angles. I have also had the full weight of the Jeep on it and nothing more than a few scratches occured in the paint. Of course that is to be expected, especally since they come unpainted and you have to DIY. Brad Kilby is a joy to work with and I will be looking forward to all the other products he will come out with.

Date: 2FEB2002 Company: Younger Brothers Product: Heavy Duty Bumper and Tire Carrier Model: 1999 Wrangler Opinion: Excellent! E-mail: Wind_Danzer@hotmail.com

Details: I ordered this product looking for a good way to carry my spare tire while also looking for good protection offroad and on the highway. It has been on my Jeep now through 5 wheeling trips, held the weight of the Jeep on a few rocks and has been backed into a tree. Not one scratch or buckle on the finish. This rack comes with a Hi-Lift holder and a CB antenna mount while the bumper comes with a 2 inch receiver in the center of the bumper (no loss of ground clearance!!!), two shackle mounts and a frame tie in kit. Provided you could handle the wait for this product (mine was about 9 months - thay had a heck of a backlog of orders), you will get the best aftermarket system on the market.

Date: 2FEB2002 Company: Powertrax/4wd Hardware Product: Lockright locker Model: 90 Jeep YJ w/D35c axle Opinion: Excellent! E-mail: sparkysffd69@yahoo.com

Details: I ordered this locker along with an OME lift kit and some other parts for my Jeep. The box was marked "for Dana 35c- clip" axles, but the parts were for a non-c-clip axle. I called them, and emailed them, and within 24 hours I had a complete replacement locker. I then returned the wrongly marked product, at their expense. Very pleased with this product and BOTH companies who were very concerned with customer satisfaction. I would highly recommend them to anybody.

Date: 22JAN2002 Company: Bestop Product: Supertop Model: SuperTop softop Opinion: Excellent! E-mail: dhawk01@earthlink.net

Details: I have never had better dealings with any company in my Jeepin experience. Products are good quality and the customer service is second to none! I would highly recommend them to anyone looking for a good softop for their Jeep! Excellent!!!!!

Date: 22JAN2002 Company: All State 4WD Product: Anything Product! Model: N/A Opinion: Excellent! E-mail: dhawk01@earthlink.net

Details: I have purchase a few things from All State 4WD and have had GREAT success! Parts are good quality, prices are the best I've seen, and customer service is number one with these guys! I would strongly recommend them as a resource for Jeep parts! Ask for Larry, he's tops!!

Date: 16JAN2002 Company: ARB/Old Man Emu Product: Old Man Emu Shocks for 3-4 inch lift Model: 97' Jeep Wrangler TJ Opinion: Excellent! E-mail: Grimmjpr@Juno.com

Details: Well words can not fully describe how great these shocks are...I have a 3 inch Teraflex kit and I had the Doetsch Tech shocks that Mepco recommended with their 3 inch kit. Well after almost 2 years of hard use my Jeep started to ride kinda funny...I really didn't think it was the shocks I mean there not even 2 years old yet.....boy was I wrong! I figured out it was the shocks after eliminating other problems it could be. I just got done putting the Old Man Emu shocks on took them for a ride and WOW these shocks are great I agree with Jeepnmike. I think anyone looking to replace his/her shocks should really consider these Old Man Emu shocks.

Date: 8JAN2002 Company: Jeep Guages Product: Guage Face plates for YJ Model: N/A Opinion: Excellent! E-mail: clark_packer@hotmail.com

Details: These guages are awesome! They really set off the appearance of the YJ dash with either white, yellow, or cloud design face plates. priced from $30-$50 depending on color (white $30, yellow $40, cloud $50...the yellow ones are only available for 87-91 models) Shipping is free and an unconditional 30 day satisfacation gaurantee is included. Happy Jeeping!!!

Date: 3JAN2002 Company: Tuffy Product: Front speaker box Model: 1983 Jeep Cj7 Opinion: Excellent! E-mail: chite5b@hotmail.com

Details: This product is great. I got it as a gift along with two speakers. The box keeps the speakers dry bu putting them under the dash, and they sound great. Easy install as well.

Date: 25NOV2001 Company: Trail Ready Product: Expedition Gurard Model: 99 TJ Opinion: Excellent! E-mail: Marcg2000@aol.com

Details: The bumper and guard look awesome!! They look like nothing else out there, the front of the jeep is completly covered and protected from anything that you can think of. I have a warn M6000 winch and that is now behind a 1/4 inch think plate of steel from the front sides and part of the top. The bumper hurt my approch angle just a little bit but not really because if i approach something at an angle with just one tire at a time I have almost a vertical approach angle! The winch is loacated slightly farther ahead of the location of it with the warn mounting bracket, but since it is better protected i feel fine about it. The only down falls to the bumper that i ran into is that it took a LONG time to come, they said 4-6 weeks but it ended up being 4 months, partly because the bumper that i ordered was one of a kind so i understand that it took longer than expected but it was still a little long. It was WELL worth the wait though. The bumper installation was a snap, the hardest part was getting the old bumper and winch bracket off because the torx head screws and i keep breaking every torx bit i try. Once the old one was off it is just a matter of lining up the winch bracket and centerpunch the location for the new screws. i had to redrill some of the holes for mounting the winch because for somereason they did not line up which wasen't easy through the steel plate, but it worked out in the end. the guard itself is seperate from the winch mour for ease of installation, and is almost endlessly adjustable to get it where you want it, once mounted it sticks above all body panels so incase of that ever dreaded roll over it will protect the fenders and hood. The guard dose block some headlight space but is still driveable at night which just means you have to get some good quality lights. After installed your jeep will look like none other.

Date: 6OCT2001 Company: Old Man Emu Product: Old Man Emu shocks Model: 95 YJ Opinion: Excellent! E-mail: Jeepnmike@att.net

Details: I love these shocks! At first I thought that getting new shocks would not make that big a difference but boy was I ever wrong! I am running a mild RE 2.5 inch lift and 31 Pro Comp MT's (I have reviewed the tires on this site before under my old email Mjeeps) and had the Doetsch Tech shocks that came with lift kit. I felt the shocks were worn out because when I would hit a bump at speed the front end would go up and down 2 or 3 times. When I received the OME shocks after talking to them first to make sure they would fit my application I was impressed with how beefy they were. They have a two year warranty on them and were massive compared to the Doetsch tech's. They have this metal clip on them to keep the shock compressed to fit in the box and when you undo the retaining clip the shock lengthens a good bit for lots of articulation. Installation was easy, just be sure to use lots wd 40 on your old bolts if they were rusty and muddy like mine were! I also recommend that you use new bolts when installing the shocks since your old ones are probably like mine and all messed up. The only thing I found is that I had to spread the lower mounting brackets apart to get the bottom bushings to fit. No big deal. OME also makes a long travel shock but that would require a new upper shock mount and maybe extended brake lines (M.O.R.E. makes these now for the YJ).

Date: 27SEP2001 Company: warn Product: winch Model: 90 wrangler Opinion: Excellent! E-mail: imfasterthanyou@zoomtown.com

Details: i bought it and i love it. it is the best investment i hae ever made for my jeep. only problem was getting the mounting plate bolt holes to line up.

Date: 18SEP2001 Company: Jacob's Electronics Product: Jacob's Offroad Ignition Model: 97 TJ 2.5L Opinion: Excellent! E-mail: irwin_bob@hotmail.com

Details: Had it installed with the Uphill Module. This stuff is so awsome. When put together with header, muffler, fan, intake, and tb spacer, the difference is amazing. A bit expensive, but worth the money!

Date: 21AUG2001 Company: Bushwacker Product: 6" Fender Flares Model: TJ Opinion: Excellent! E-mail: steve@kinemedics.com

Details: I purchased the adhesive fender flares from Bushwaker for my 98 TJ with a 2" lift. I had some issues (clearnace & adhering) with the product. I got in touch with Bushwaker through their web site. I recieved a letter within days and new bolt on versions of the flares within a week. A GREAT COMPANY WHO UNDERSTANDS CUSTOMER SERVICE.

Date: 20AUG2001 Company: Teraflex Product: Quick Disconnects Model: YJ Opinion: Excellent! E-mail: lndwarrior@hotmail.com

Details: I was at the end of a very long, frustrating day of wrenching. I had accompl;ished nothing for 6 hours of work and was ready to quit for the day. I had bought the disconnects the day before but had more pressing problems to deal with on the Jeep. Before I packed up my tools for the night I figured I'd just read the install instructions & relax for a few minutes. Well, maybe I'll just pull my bolt on disconnects off so I'll get a jump start on installing the QD's the next day. "Step one, screw the rounded post onto the lower bolts." Ok. "Step two..." Ten minutes later I'm done! Every once in a freakin while I come across a product even I can't screw up. It was a pleasant surprise to find such a simple idiot-proof product. Afterwards I took them on and off a few times - no problems. I can't hear them on the road. At the end of a long day they really helped to improve my attitude! Very happy I bought these.

Date: 15AUG2001 Company: Skyjacker Product: Rockready 8" TJ suspension Model: TJ Opinion: Excellent! E-mail: SkyHighTJ@aol.com

Details: This kit is it! It is quite extensive to install I did it myself in about 5 days with no help. It requires much labor to put on, but when done it rides awesome, flexes great, and is overall just plain sweet! I just came back from Camp jeep 01' and now I've put about 3K on since I installed and have had no problems, except with breaking quick disconnects, the Jeep is so high, and naturally wants to flex on anything...literally you must be careful how fast you go over curbs(for instance when going around someone...whatev) other than that it rocks, but I plan on swapping out the skyjacker disco's for an antirock swaybar but for now, skyjacker was happy to replace the discos...overall its awesome!

Date: 8AUG2001 Company: PPW Product: Premier Power Welder Model: '98 TJ 4.0 Opinion: Excellent! E-mail: ted.cacioppi@cliffordchance.com

Details: I won some money off it at a raffle, so I figured what the hell I want to learn to weld anyway. I slapped it in (great cust service on tech support) and was able to practice running a few beads, but not much. Soon thereafter, I slid/backed into a tree and tore the mounting flange off my spare tire carrier. I had no room for the spare in the back. I was at a major 4x4 trail run event. So I pulled into a staging area, fired it up, used the elec outlet to power my grinder to prepare the thing, and welded away. It worked! A strong, acceptable trail fix was soon had. Soon I was letting another guy weld a tie rod back together, after having cut some angle iron for him with the grinder. The next morning at 6:30 am I was welding another guy's differential innards so that he could drive home. So beware - its an excellent product, but it'll make you friends you never thought you had.

Date: 18JUL2001 Company: borla Product: borla header Model: TJ 4.0 Opinion: Excellent! E-mail: kebm2@excite.com

Details: Got the header from 4wheel parts wholesalers. They matched competitors price, plus free subscription to their Offroad Adventures magazine. Install took about 6 hours, but it was fairly easy. Jeep has more power now, and requires alot less downshifting for hills, etc.

Date: 17JUL2001 Company: JKS Product: JKS disconnects Model: YJ 1994 Opinion: Excellent! E-mail: astreet@usatoday.com

Details: These things are rock solid. They feel solid out iof the box and they are easy to put on (minus the ball joint you have to seperate on the stock disconnect). If any on eid looking to buy great disconnects, definately look into JKS.

Date: 16JUL2001 Company: Cape Conversions Product: "Juce Box T.F.I." Model: CJ7 Opinion: Excellent! E-mail: jaxdon@earthlink.net

Details: I ordered the TFI Juce Box from Cape conversions. It arrived in record time, and the installation was easily accomplished. Cape Conversion quickly answered a couple of E-Mails that I sent them. The only change on installation was to solder the connections, as I dislike the crimped on ones. When I finished, the CJ started right up, and setteled down to a nice, smooth idle. On a test drive, it ran smoother, and had more power. On the freeway, The ole 258, "wound out" very nicely. The price of this unit is about 1/3 of the Jacobs or similar units. I am very pleased with this modification.

Date: 14JUL2001 Company: Dynomax, Catco Product: Ultra Flow muffler and mandrel bent pipes, Catco hi-flow catalytic converter Model: 98 TJ 2.5 Opinion: Excellent! E-mail: mygiftwou@aol.com

Details: Just put on a Catco hi-flow converter, Dynomax Ultra Flow and 2.5" mandrel bent pipes. What a difference...the engine really feels like it has opened up. There's a definite increase in power and they sound great...a little importish, but I think it's mostly the fact that I have a 4 cylinder. Can't really say if it improved gas mileage cause I haven't been shifting until it hits about 4500 RPM.

Date: 26JUN2001 Company: SkyJacker Product: Rock Ready 8" suspension Model: TJ Opinion: Excellent! E-mail: SkyHighTJ@aol.com

Details: This kit is it....I had a tough time w/ the long-arm choices out there, but im am well pleased with my choice. The skyjacker kit is solid, Jeep drives great on the road with 8" suspension and 1" body thats not often you can say that....also performs amazing offroad!!

Date: 26JUN2001 Company: DayStar Product: Lift Spacers Model: 88 XJ Laredo Opinion: Excellent! E-mail: jcdavis@sympatico.ca

Details: Black poly. Installed in back yard (too tired to head to garage) with basic tools and a hi-lift. Only had to remove my shocks and springs to install the spacers. 2 hour install time including a coffee break.

Date: 19JUN2001 Company: Olympic Product: Olympic Rock Rails Model: 98 XJ Opinion: Excellent! E-mail: jmikula@bigfoot.com

Details: Easy to install, I did it myself. Minimal drilling (I did use a drill bit extension to make it easier) They look good. They fit good. And over the last 2 years, I have pounded the s**T out of them. I have got dings, scratches, and DENTS all over the undersides. They took all the punishment I could dish out!

Date: 4JUN2001 Company: Cape Cod Conversions Product: JuiceBox Gold 6 Model: 258 / 4.2L jeeps Opinion: Excellent! E-mail: lcoppenr@yahoo.com

Details: Very simple and straight forward way of making a 258 run much more smoothly. Kit took about 1/2 hour to install and my 258 actually idles smoothly. You can put this same kit together yourself, but you'll end up spending darn close to what this kit costs.

Date: 1JUN2001 Company: Painless Wiring Product: Customer Service Model: N/A Opinion: Excellent! E-mail: jstark@halla.on.ca

Details: Customer service is top notch. This company cares about quality and will stand behind it. I am very pleased and will buy Painless again.

Date: 25MAY2001 Company: ?????? Product: J.C. whitney dual exhaust Model: dual exhaust for 304 v-8 Opinion: Excellent! E-mail: robert6688@hotmail.com

Details: I ordered this kit for my off-road only jeep. I arrived in good shape 4 days later. They were very easy to install as they fit really well. Had to do a litte trimming with a chop saw because they were to long for my CJ-5. Dont use any of the bolts that come with it, get some grade 5 or 8. They cost 1.50 at napa. Be sure to buy or borrow the correct tools needed to install. You dont have to weld anything but I went ahead and welded mine. If you check the clamps often the slip fit should not be a problem. Tools used: mig welder, socket set, chop saw, sawzal(to remove old exhaust). Alright now to try them out. These pipes are loud, but they do give a good power increase. Watch out for the cops and then rackem' off.

Date: 23MAY2001 Company: Performance Products Product: Mirror Relocation Bracket Model: '97 TJ Opinion: Excellent! E-mail: EHStaley7@aol.com

Details: These brackets are a true "bolt-on." They come with everything you need to install them. The only problem is they get moved when the door swings out and you cant see the passenger side mirror with the upper door skin in, but if you go doorless the majority of the time they are an excellent buy.

Date: 21MAY2001 Company: Pro Comp Product: Explorer Pro Comp Spring Kit Model: CJ5 2-1/2" Springgs Opinion: Excellent! E-mail: synchronicity@frontier.net

Details: Definitely not too stiff. Easy install. Ran 10 days w/o shocks (offroad only) to break in springs. Good to go.

Date: 16MAY2001 Company: Herculiner Product: Herculiner kit Model: YJ Opinion: Excellent! E-mail: erc114@excite.com

Details: Excellent product put in a week ago and love it so much simpler than carpet and nicer looking than bare floors! Also prevents the nasty habit of carpets to hold moisture causing mold and rust. Application was easy once everything was out though it must be noted get an extra roller because it really requires 3 coats (you get two rollers with the kit) to get complete coverage or you get the occasional speckled area. I left mine a little light so I could apply a touch up coat later to coverup any gouging/fading/wear etc. Take your time do the prepwork and this will be one of your favorite modifications!

Date: 16MAY2001 Company: Pace Setter Product: TFX exhaust Model: 98 Wrangler Sahara Opinion: Excellent! E-mail: PRGOLF03@aol.com

Details: After getting the old muffler and pipe off, it was a breeze. Being only 16, it took 3 hours to get the old pipe off with the help of a friend. The new one just went into place after a few hits with a rubber mallet, then the three bolts and its done. I'm not sure of the performance gain, but it sure sounds great, the chrome tip is nice too.

Date: 8MAY2001 Company: Optima Product: Yellow Top battery Model: 97 TJ Sahara Opinion: Excellent! E-mail: comtian_positivism@hotmail.com

Details: This battery is great, though a little pricey here in Canada. It's smaller then the stock dealer battery but provides all the power for my offroad and driving lights (1 set of 150watt KC daylighters, a set of KC foglights 80 watts) and a set of road boy driving lights (100 watt bulbs) not to mention power my stereo without fading my cab lights. It's a sweet product, the electrolyte is gel so it will never freeze and the spiraled plates create better conductivity for ignition.

Date: 29APR2001 Company: Four Wheel Drive Hardware Product: Tire Carrier/Bumper Combo Model: 1986 CJ7 Opinion: Excellent! E-mail: livetowheel@yahoo.com

Details: The combo was much more than I expected, it is a heavy duty addition that I highly recommend. We had a late winter trip where we ran into four foot snow drifts fifty to three hundred feet long. Like a dummy I neglected to bring my rear clevace. I proceded to hook a strap onto my spare tire carrier to pull a co-wheelier out of a long drift. I heard a pop and thought that I had really messed something up, I kept pulling until he was free. When I looked at the damage all that I found was that I had popped the sheer pin on the carrier handle. The only thing that pulled the low rider land cruiser through the drift was the tire carrier.To say the least I was impressed with the timpken bearing design. The only hints I have is if you are planning to put diamond plate corners on, is to use the spacers included in the install kit. It will give you the clearance needed for your gas filler. By the way, everything lined up perfect and was an easy install.

Date: 29APR2001 Company: 4 Wheel Drive Hardware Product: Accessories Model: CJ, YJ, TJ. Opinion: Excellent! E-mail: Jeep2Deep@cs.com

Details: I have dealt with and ordered from 4 Wheel Drive Hardware repeatedly and highly recommend them. They have always provided me with excellent customer service as well as competitive pricing and reliable shipping. Next time you purchase an accessory for your CJ, YJ or TJ, give 4 Wheel Drive Hardware a try and I don't think you will be disappointed...unless you buy a Steel Horse product and you can't blame them for that!!!

Date: 29APR2001 Company: ARB Product: Safari Snorkel Model: 1999 TJ Opinion: Excellent! E-mail: Jeep2Deep@cs.com

Details: This thing is sweet. Having A/C complicated the installation to some degree but it looks awesome and should help prevent any water intrusion into the motor as well as minimize dust into the air filter. It came with excellent stainless hardware and fits very well. If people spend thousands of dollars to insure the vehicle, why not spend a couple of hundred to insure the motor?

Date: 14APR2001 Company: ARB Product: ARB air compressor Model: TJ Opinion: Excellent! E-mail: rivkev@hotmail.com

Details: The compressor runs the lockers perfectly. However, I was burning up fuses when using the ARB tire inflation kit. ARB advised replacing the tube fuse with a weatherproof blade-style fuse, and it's never troubled me since.

Date: 8APR2001 Company: Goodyear Product: MT/R Tires Model: N/A Opinion: Excellent! E-mail: jtkeefe@cvn.com

Details: These tires are great! Quiet on the road, great off-road. Got a good deal at Walmart - $139 per tire, 31x10.50. Try 'em, you'll like them.

Date: 7APR2001 Company: Borla Product: Borla Cat-back system Model: 2000 TJ Sport Opinion: Excellent! E-mail: ranma@coqui.net

Details: This is great. After 2 weeks of problems with the shiping price, it finaly got home. Intructions are easy to follow (although it's just connecting 3 pipes). The only problem was taking the stock muffler out. It took me 2 hours and 2 days of neck pain. The new one took 15 minutes to install and it sounds great, and you feel the extra hp and torque. I didn't put the tip because I didn't like how it looked with my Jeep and I didn't want to crush it between a rock and my bumper.

Date: 30MAR2001 Company: skyjacker Product: skyjacker 2.5" standard lift Model: 2000 TJ Opinion: Excellent! E-mail: doerschuk@hotmail.com

Details: This kit is great. A friend and I put it on on a saturday afternoon. Fairly complete and extremely easy to do yourself. It was so easy that my friend and I were convinced that we did something wrong. The only thing the kit does not include are the sway bar discos, other than that you can put it on and go! I only recently did this so I have not had the time to test the capabilites off-road. I definitely recommend this lift to anybody who wants room for 32's and doesn't want to spend a whole lot of money (I got mine for about 550).

Date: 25MAR2001 Company: accel Product: accel super coil Model: 1980 CJ5 258 Opinion: Excellent! E-mail: trembatd@juno.com

Details: I had a rough idle in my Jeep I installed the Accel Super coil along with a distibutor cap and rotor from an '85 ford 300-I6 and heavy duty 8.5MM wires. I am not sure if it was the super coil or not but the I think it was part of it the idle cleared up and the low end seems much better. Before I spent money on the jacobs or MSD to get the better performance I would buy the Super coil and convert every thing over to the Ford cap and rotor it bolts right in. I really like the super coil. To find out more about the ford mod see the Off-Road bulleten boards and find the Team Rush conversion.

Date: 25MAR2001 Company: Rough Country/Heckethorn Product: 3" Lift kit Model: 1988 XJ Laredo Opinion: Excellent! E-mail: jcdavis@sympatico.ca

Details: Shipping from the US: Less than 2 weeks. Ordered from JC Whitney-$99.99 US ($242 Cdn - with shipping duty and taxes). Install time: 6 hours (including brakes), first suspension lift install ever for me.

Date: 21MAR2001 Company: ok 4wd tire and auto Product: ok4wd tire and auto Model: currently a 2000 jeep(TJ) Opinion: Excellent! E-mail: chuckbo@hotmail.com

Details: I've been going to this store for about 7 years now. I am very big on customer help and opinions from people who know what they are talking about. I always get my questions answered and the parts I'm looking for. I started out with a regular p/u truck, then I bought a show truck and they helped me find the right stuff to compete very strongly at many shows. Now I have a Jeep (TJ) and I'm really thankful that they are there the ups and downs of offroad with they're vast product selection and fantastic mechanics. I think it's one of the best to go to for parts for anything from a Jeep, muscle car, import, monster truck, lowrider, and on and on. I've seen some pretty sweet things roll out of they're garrage. Check out their web site for more info I think it's worth it.Thank you for reading my opinion.

Date: 19MAR2001 Company: ARB Product: Bull Bar w/winch Model: TJ Opinion: Excellent! E-mail: stexastj@yahoo.com

Details: Very stout, this bumper can take a hit and won't even hurt the powdercoat. It toke me a while to decide which bumper I wanted to go with, and I finally choose ARB and I love this bumper. (ARB ROCKS)

Date: 19MAR2001 Company: 4wd Parts? Product: Hood Lock Model: YJ Opinion: Excellent! E-mail: jamgood96@hotmail.com

Details: Seems pretty sturdy. When it's locked a latch blocks the hood release latch keeping the hood from being opened. Seems pretty strong and sturdy. Haven't tried or had someone try breaking into it. But I'm fairly comfident in it.

Date: 19MAR2001 Company: Husky Product: Husky Floor Liners Model: YJ Opinion: Excellent! E-mail: jamgood96@hotmail.com

Details: These fit great! They contour to the floor very good. They have nice little nubs on the back to stay put in carpeted vehicles. I only have Herculiner on the inside of my Jeep so the nubs do nothing. I was actually worried about them tearing up the Herculiner, so I cut off all the nubs. Man, sore hand! Good product!

Date: 13MAR2001 Company: Durango4x4 Product: Rear Bumper Model: 98 TJ Opinion: Excellent! E-mail: rickterry@execs.com

Details: Great company, great bumper, great price. Asked for some modifications, they performed at no extra charge. Even with mods, received in 2-1/2 weeks. Instructions were clear, and everything lined up as it should.

Date: 12MAR2001 Company: Sky Jacker Product: Sky Jacker TJ Disconnects Model: TJ Opinion: Excellent! E-mail: hoguel@gfusd.k12.ca.us

Details: These are by far the best disconnects out there. The feature a center section which can be completely removed and poly. bushings throughout. The not only look sharp (Gold color plated similar to the tie rod) but also improved my ride...Seriously. I had a pair of Pro Comp sway bar extensions prior to these and the Sky Jackers made a huge improvement. ONE NOTE HOWEVER, the pins used to disconnect are a little snug and seem to be somewhat of a burden, nevertheless, I have been told that these will begin to loosen up after a few miles on the highway!

Date: 8MAR2001 Company: BDS Product: 3" BDS Model: TJ Opinion: Excellent! E-mail: zimmerman@chartermi.net

Details: Just put on a 3" BDS lift and it is awesome! It gave me more like 4", but it the most complete kit and cheaper than all others I have priced and it is good stuff to not made cheap.

Date: 5MAR2001 Company: Firestik Product: Firefly CB 3ft ant. Model: 93 YJ Opinion: Excellent! E-mail: erc114@excite.com

Details: Good antenna, reasonable performance for such a shorty mounted on a bumpstop. It is a very durable antenna and has taken numerous hits from branches without a problem (note that I do have it on a spring), it is also thin enough it has a rather attractive look on the Jeep compared to its full weight sibling. Surprisingly it doesn't beat the top much and has only done so on one occasion Since January and that was driving 80mph with 30mph plus crosswinds, this is acceptable IMHO otherwise even at fairly high speeds and sudden stops it hasnt hit the stop. My only complaint was it came up with a very high SWR upon initial testing (which was easy to tune out with the tunable tip) which was surprising since they claim they should be between 1 and 1.5 out of the box and this was with a firestick matched cable system. The biggest contributors to this condition could be the spring. Overall an excellent product and I would buy one again though I may step up to the 4ft. JB's Jeep Acc. Grade: A-

Date: 23FEB2001 Company: Tuffy Product: Overhead Console Model: 00 Jeep TJ Opinion: Excellent! E-mail: saunderscc@vaw124.navy.mil

Details: This product is great and worth the money. The only hard part was the wiring for the radio. Each wire had to be lengthend seperatly. Once done though what an investment. I fill much safer with my radio there than in the dash, it is very secure and sturdy. A must.

Date: 20FEB2001 Company: Quadratec Product: Bullet Hole Stickers Model: 2000 TJ Sahara Opinion: Excellent! E-mail: twodice@usa.net

Details: I wasn't too sure about my decision to buy these. But after I received them I was amazed. These things look real!!! The craftsmanship is truly remarkable.

Date: 12FEB2001 Company: Tera Flex Product: TJ Rear Adjustable Track Bar Model: N/A Opinion: Excellent! E-mail: jeepco@aol.com

Details: I had fuel tank skid support interference problems with the stock track bar. Putting the adjustable track bar on not only solved the interference problem, but also improved high speed handling....the TJ is more predictable. This is an easy install too!

Date: 6FEB2001 Company: Rubicon Express Product: Rubicon Express Budget Boost Model: '99 TJ Sport Opinion: Excellent! E-mail: Wind_Danzer@hotmail.com

Details: Beautiful!!!! The ride is a little stiffer than stock but you can tell there is a difference in the hight. Looks more agressive too. Great little lift for people on a tight budget and/or don't want to go big.

Date: 6FEB2001 Company: www.onboardair.com Product: On board air kit Model: '98 TJ Opinion: Excellent! E-mail: ted.cacioppi@cliffordchance.com

Details: Put in a york, york brackets, and tank from the above for a '98 TJ with AC. You have to do the fittings and pressure switch - I re-used my ARB wiring harness, and run the York at 100-140 PSI, with a manual regualtor to step it down to 90 PSI for the ARBs. Well thought out brackets, good product. It does require that you research and execute the plumbing and wiring. The ability to air up fast and run air tools on the trails is really good.

Date: 24JAN2001 Company: central4wd.com Product: Husky Floor Liners Model: 1993 Wrangler Opinion: Excellent! E-mail: dianewinder@hotmail.com

Details: This company is one of the best I've found out on the web as well as being a whole lot cheaper than most i.e. 4 wheel Parts Wholesalers. Customer service was excellent and my product arrived in less than 3 days. They are also very quick to answer email enquiries and give advice.

Date: 22JAN2001 Company: ARB Product: OME 50mm suspension lift Model: 1998 TJ Opinion: Excellent! E-mail: carrolljs@hotmail.com

Details: I just put on the 50mm OME suspension lift with the 10mm trim packers with the OME nitro-charger shocks. I got way more lift than the 60mm it said. The handling and the performance of this suspension is unparalled. I highly recommend Old Man Emu!

Date: 21JAN2001 Company: Gemini Sales Product: Stainless Steel Parts Model: N/A Opinion: Excellent! E-mail: sethhomer@home.com

Details: I ordered all sorts of stainless parts locally an paid through the nose, so I went online asd found gemini-sales.com they had everything I wanted and more. Thier prices were cheaper, even with the shipping charge on top. I returned all the parts I bought locally, and saved myself over $200.

Date: 19JAN2001 Company: Ox Trax Product: Ox Trax Locker Model: Cherokee Opinion: Excellent! E-mail: dave1960@prodigy.net

Details: For those of you looking for a bulletproof, manual locker for your front Dana 30 this is the one. Cheaper than an ARB without the hassles of air lines, o-rings or an air compressor. A simple, but thick shift cable is the means by which this locker is activated. This locker is heavy duty and also comes with a heavier differential cover with a drain and fill plug, thus eliminating the hassle of removing your cover to change the gear lube. So if your looking for for a hassle free, heavy duty, 100% lock up in the front like I have been for 5 years this is definately the product for you.

Date: 19JAN2001 Company: Poweraid Product: Throttle Body Spacer Model: 1997 TJ 2.5L Opinion: Excellent! E-mail: takedowns@yahoo.com

Details: Fairly simple installation and a definite gain in power and gas mileage. Well worth the price at $70.00.

Date: 12JAN2001 Company: Borla Product: Borla Headers and Cat back System Model: TJ Sport Opinion: Excellent! E-mail: hoguel@gfusd.k12.ca.us

Details: This combined system is awesome. Installed it will run you about $1000. Yes it's not cheap, but I really believe it is worh it. I got about 15+ horses out of it a better mileage. It made a great difference in torque and higher RPM. The sound is great, a little deeper than stock, but not so loud you wake the neighborhood. I highly recommend.

Date: 6JAN2001 Company: Powertrax Product: No-Slip Model: F-150 2WD Opinion: Excellent! E-mail: gwinkel05@cs.com

Details: I recently purchased a Ford LSD (8.8 31 spline)on ebay, only to find out that I needed a different carrier to be compatible with ABS. In utter dissappointment(since I had my truck torn apart, and I'd replaced the carrier bearings) I decided to order a Powertrax No-Slip unit. Installation was very easy, and the unit is performing as advertised. My truck is a manual transmission, so I do feel a bit more drivetrain looseness, but after a week or so of driving, it's barely noticeable. It is quiet, and performs very well. During normal operation, it performs like an open differential. Only when turning off of a side road, or out of a parking lot into traffic, under moderate power, do I feel some tire "chirp". Other than the no slip, my truck is bone stock. I highly recommend this unit to anyone who is looking for the ultimate in traction, with minimal side effects. P.S. Look for the LSD on ebay.

Date: 3JAN2001 Company: Bosch Product: Platinum Plugs Model: YJ Opinion: Excellent! E-mail: erc114@excite.com

Details: After all the discussion over the Bosch plugs. I decided to up my schedule and get a set. I have used these before in the 4.0L engines with pretty decent results though I had forgotten how much of a difference they made! The vehicle feels much more responsive, I dont know if I gained any horsepower but the vehicle runs quieter, accelerates faster and smoother! I am very very impressed! Though i can not attribute all of these gains to the plugs as they guy who had the vehicle before me had them gapped terribly varying from so small it was ungaugeable to .060 and the plugs were mixed manufacturer....ugh. From my experience these are an excellent addition to a Fuel injected Jeep! Definitely worth the little bit of extra cost! Take care good luck!

Date: 31DEC2000 Company: Olympic 4x4 Product: Rock Bumper w/receiver Model: Wrangler TJ 2001 Opinion: Excellent! E-mail: imajeepman@home.com

Details: I bought matching front and rear bumpers from Quadratec. The construction detail is good, not great, but the materials are very beefy. I had to use washers for spacers on the rear bolts that go into the factory bumper bracket to keep from bending the bracket when I torqued the bolts. Both bumpers lined up perfectly with the bolt holes. I only have two complaints. First, the rear receiver hitch pin hole was drilled too high and I had to grind it out a little to get the pin through. Second, there is no place to mount the license plate on the front bumper. I drilled two holes to the side of the receiver to accomodate this. All in all, it's a great value for the price.

Date: 28DEC2000 Company: Poweraide Product: Throttle body spacer Model: TJ Opinion: Excellent! E-mail: cevery@reil.com

Details: I ordered the TBS through Macromotive.com and receieved it immediately. It was incredibly easy to install, it took me 20min. Works really well with some noticeable kick to it and has increased milage a bit. Only draw is that it whisles (vacuum leak sound) with hard acceleration. But it does not bother me. This along with the Airraid/ K+N intake works Great!

Date: 21DEC2000 Company: Hidden Hitch Product: 3500Lb 2" reciever Model: 93 YJ Opinion: Excellent! E-mail: erc114@excite.com

Details: Excellent product, incredibly strongly built and it has held up to my abuse. Install was very simple though they did short me one wire puller so I had to reuse one and some of the bolts that went into the rear frame cover were a little long but nothing that couldnt be fixed with a grinder. As for function it drops a little lower than I like but no lower than the gas tank so I dont think it really has that much effect on ground clearance. Highly recommended product JB's evaluation grade: A-

Date: 12DEC2000 Company: Leon Rosser Product: Leon Rosser Jeep Model: overall Opinion: Excellent! E-mail: MsKitty269@aol.com

Details: I ordered a locker and a Tiger Top for my C75. Came in 3 days. Tiger Top was 60 dollars cheaper than ANY other company I could find and was complete. Knowlegable staff, exceptional customer service. I would recommend dealing with Rosser Jeep.

Date: 10DEC2000 Company: Warn Product: Warn M8000 Model: 95 YJ Opinion: Excellent! E-mail: Mjeeps@aol.com

Details: This has got to be the best value light to medium duty winch for the money! Installation was a breeze except for lining up the spacers on the frame rails while trying to lay the winch down on top. I would recommend using some art putty to stick the spacers down. This past weekend I had to use the winch on a rock that had me in a crevice pointing the front end to the sky. All the weight of the jeep was on the cable and it just kept pulling. You must also purchase the winch accessory kit to go with it. The clevis hitch and snatch block are first rate and are very strong. We had to use both help a fallen Samurai and they did their job. Order the stuff from Clemson 4Wheel Drive on their website and you can't go wrong. I ordered it on a Sunday and it got here on a Tuesday.

Date: 6DEC2000 Company: Turbo City Product: Air Tube and TBI Model: 2.5 with 5spd tj Opinion: Excellent! E-mail: ho1ski@aol.com

Details: Bought the air tube, TBI, Jet performance module, and TFX cat-back system for 2.5 5-spd TJ and have no complaints. Best thing I did for my TJ. Better throttle response and great mid-range power. Only down side is 4-HI is a little more doggie. But in 4-Low, hang on.

Date: 6DEC2000 Company: Skyjacker Product: 4" Double flex lift Model: 2000 TJ Sport Opinion: Excellent! E-mail: hivolt@swbell.net

Details: Unreal!! Coming up on a year since I installed and still no sag and nothing has broke. I am still running 3.07/opens and can go most places a leaf sprung, lockered rig can go. That's the honest to God truth!! The disconnects work great after you label the top and which side. You wouldn't believe the flex I get. I strongly suggest this set up. I also have 1-3/4" spacer up front and 1" in rear and am able to run 35's. They do make alot of popping noise when wet due to no rubber but I'll take it!!!

Date: 4DEC2000 Company: Explorer Pro Comp Product: Pro Comp Mud Tires Model: 95 YJ Opinion: Excellent! E-mail: Mjeeps@aol.com

Details: Wha specman1 wrote on the 17th of Nov. is right on the money. I have had my 31x10.5 Pro comp MT's on since July and love them! They are quiet on the road, very quiet for a mud tire(must be all the siping), look really cool, and have gotten me out of some sticky, muddy situations. they are also a true 31 inch tire. Great product, not too expensive at all at $113 average a tire. I would highly recommend this tire to anyone.

Date: 27NOV2000 Company: Thor enterprises Product: Thor sound wedge Model: 2000 tj Opinion: Excellent! E-mail: hafido@hotmail.com

Details: I recently installed these sound wedges which go in between the roll cage and the back seat. They are awsome. Along with this, i installed 5 1/4 inch kicker seperates and dash tweeters and a kicker substation. along with an aura amp which fits perfectly under the seat. If you want pictures of my set up you can e-mail me and I will send them to you. My whole system was a little pricey ($1000), but it rocks.

Date: 18NOV2000 Company: Weber Product: Carberator (K551) Model: '89 YJ w/ 106k miles Opinion: Excellent! E-mail: julienis@email.com

Details: Two words, "Woa" and "woohoo". This carb is amazing, better fuel efficiency, hell of a lot more power (yes I can do a smoke-out on dry pavement now :o) and I recommended it over MPI upgrade system.

Date: 17NOV2000 Company: Teraflex Product: 3 inch system Model: 97' TJ Opinion: Excellent! E-mail: Grimmjpr@Juno.com

Details: This lift kicks....the flex is excellent, and the ride on the road is great. The 3 or so hour ride to Moab is soft but still firm enough to not be all over the road. The 3 inch lift with the 3/4 inch spacers(i have a 9000 lb winch)lifted my Jeep a little over 5 inches. I run 33x10.50x15 BFG AT KO's on stock 5 hole Jeep rims....at full flex there's still a little room before the tire would hit. I would also like to add that the BFG AT KO's are really great, great all around tire, quiet on the road, wear well, excellent wet traction(rain or snow) and great off road. There may be better off road tires.....but if your looking for a great set of tires for your daily driver and you don't want to have 2 sets of tires, these will would be the best choice.

Date: 17NOV2000 Company: Pro Comp Product: Pro Comp Mud Tires Model: 35/12.50/15 Opinion: Excellent! E-mail: specman1@mindspring.com

Details: I had 33/15.50/15 TSL/SX Swampers. They were great off road but worthless everywhere else. I will never by another bias ply tire. The New Pro Comp Mud Tires are bigger, took less weight, make way less noice and the ride is near perfect. One tire has 1/4 oz the rest have less than 3 oz. I would recommend these tires to anyone.

Date: 16NOV2000 Company: off road general store Product: 1 3/4" spacer Model: TJ Opinion: Excellent! E-mail: SkyHighTJ@aol.com

Details: These spacers are it. Bottome line - if you want great looks from your spacers grab these, they are aluminum, but you leave the stock isolators and that softens the blows. Plus they Look great on top of my RE 4.5''! However they are only intended for front use, since they have such a long collar that extends about two inches.Pretty sweet looking spacers. Throw some polys out back...they are cheap. Watch out..control arm length quickly becomes an issue.

Date: 16NOV2000 Company: 3 COM Product: Liquid Masking Model: N/A Opinion: Excellent! E-mail: GeneHubert@aol.com

Details: The product is used for protecting automotive finishes during body repair. A pink liquid that drys clear, then washes off with high pressure water or hand washing. Coat all areas of the vehicle prior to going into the dirt and it will help resist scratching from brush and at the end of the trail go to a car wash and you have a clean bright finish! The draw back is the finish will draw dust to the surface so your vehicle will look a 'dirty' when ran off road, so what! The other is use in extreme wet conditions reduces the effectiveness. But for dry conditions with few creek crossings, you can not beat this, especially for the more aggressive modified SUV users! What the heck, my sons steal it from me for the TJs too, even rock crawling them! Available at the better auto part stores or visit your local collision repair business and make a deal on a quart to try out. It takes about a pint to put a good coat on a GC.

Date: 7NOV2000 Company: ALL TERRAIN KO Product: BF GOODRICH Model: 89 XJ w/ 4.0L Opinion: Excellent! E-mail: piper@escape.ca

Details: These tires rock. It's winter and they are awesome on freezing rain and deep snow. I highly recommend these babies!! I got the 31x10.5 and I love them.

Date: 2NOV2000 Company: Metcalf Motorsports Product: High Clearance Skid Plate Model: '98 Wrangler Opinion: Excellent! E-mail: ted.cacioppi@cliffordchance.com

Details: I was one of the first guys to do the 1-inch body lift version of this kit, so Brennan (the owner) and I worked through some minor problems (fan rubbing fan shroud). You need a 1 inch body lift and rear CV shaft to do this "belly up" type kit. You also need 1 inch higher motor mounts (yours or Brennan will sell you his) plus *maybe* 1/4 inch spacers under the mounts. The skid is much higher than stock, and much stronger. I've high-centered the rig on it so all the weight is on the plate. No problem. Very stout. I was able to fabricate a way to make my Skid Row oil-pan skid to bolt onto it - the Metcalf skid is the perfect size and shape to mate up to the Skid Row skid if you just weld a piece of plate on top of one of the skids.

Date: 31OCT2000 Company: Powertrax Product: Lockright locker Model: 1984 CJ-7 Opinion: Excellent! E-mail: bachyan@go.com

Details: Used it the front Dana 30 of my CJ. I can not tell it is there until I need it. Even off-road never heard it make one peep. I have an auto so it doesn't get torqued that much. I go anywhere and everywhere. If you have an auto tranny, save money and buy Lockright!

Date: 30OCT2000 Company: BF Goodrich Product: Radial All-Terrain Model: Cherokee Opinion: Excellent! E-mail: blackjeep84@hotmail.com

Details: It hadle all off-road situations well. Particularly rock crawling.

Date: 25OCT2000 Company: Tom Woods Product: Front Drive Shaft Model: '98 TJ Opinion: Excellent! E-mail: ted.cacioppi@cliffordchance.com

Details: After turning my stock shaft into a pretzel, I ordered a replacement from Tom Woods. Its a work of art - great shaft. Greaseable U joints and CV centering ball, sealed and booted shaft. That's the smartest design, I think - U joints will always eventually leak, so you might as well grease them, but the shaft can be sealed. This is the first CV centering ball I've ever heard of with a grease fitting. the shaft is a little narrower than stock but much heavier. Tom really knows his stuff and returns all his calls the same day.

Date: 25OCT2000 Company: DMI Distributing Product: Catalytic Converter Model: 95 YJ Opinion: Excellent! E-mail: becky@beksnet.co.uk

Details: Owning a Jeep in the UK can be a bit pricy for parts, cheapest UK price for a universal Catalytic converter was £158 ($230). I surfed the net and ordered the same part from DMI at 19:30hr on a Friday eve, Monday 10:30hr UPS were delivering with my new Cat, including posting & tax it cost me a total of $185, I had a new catalytic converter fitted for the same price as the part cost to buy in the UK. Worth the effort, and DMI were brilliant!

Date: 23OCT2000 Company: Bestop Product: Supertop Model: 1993 Jeep Wrangler Opinion: Excellent! E-mail: dparani@pacbell.net

Details: The Supertop replaced my hardtop w/hard doors. The installation was a breeze and the outcome was awesome. The kit was complete and the instructions and video was easy to follow. I don't even want to put my hardtop back on. I highly recommend this top.

Date: 14OCT2000 Company: Goodyear tires Product: 33x12.5x15 Goodyear MT's (the originals) Model: N/A Opinion: Excellent! E-mail: cabe1@talkcity.com

Details: I did alot of research I mean alot or research before I actually purchased Mud tires for my 95 YJ. I looked at such characteristics as handling, noise, vibration, tread wear, and off-road perfomance. I needed something that would last on 500 miles a week on high way and weekends in the Oklahoma clay and limestone rock with an occasional trip to the dirt mounds. They are extrodinary on and off road. They have a nice hum but not obnoxious like BFG MT's or any other mud tire. They are affordable and stylish. They give my jeep that millitary look I am looking for, by the way if they are good enough for the US millitary to run on their Humvees and standard equipment on civilian Hummers they are good enough for me. I ve galged them on Limestone rock without a tear and burried them in oklahoma gumbo and clay without getting stuck. If you only buy one set of tires this year buy the Goodyear MT's they are cheaper than the MT/R's and they do better in my opinion.

Date: 11OCT2000 Company: Poweraid Product: Throttle Body Spacer Model: 97 TJ sport Opinion: Excellent! E-mail: surdi@bu.edu

Details: It cost $80 and took 30 minutes to install but now I get an extra 20 miles from a full tank of gas and a little more power. It does whistle under hard acceleration, but so what! It works, it's cheap, and a monkey can install it. I recommend getting one.

Date: 11OCT2000 Company: Hansen Product: 50" Sierra Front Bumper Model: TJ Opinion: Excellent! E-mail: ross.white@hudsonrci.com

Details: Very nice rock bumper at $160 ($155 for the 42 inch shorty) with a twist: it already has the winch plate built in, which also goes back and houses the TJ swaybar, replacing one more cheap piece of plastic. With this bumper, the winch, and a 2 inch lift, my TJ is finally starting to look like a real Jeep.

Date: 11OCT2000 Company: JKS Product: Quicker Disconnects Model: TJ Opinion: Excellent! E-mail: ross.white@hudsonrci.com

Details: A major addition to the phase 1 buildup. You can read anywhere how much the disconnects do for you off road (they do). These are much higher quality than others I have seen, and well worth the little bit extra for the no-bunjee cord approach to keeping the swaybar out of the way when disconnected. They fit like a glove, no fabrication or modifications required except for drilling two frame holes for the retaining studs that eliminate the need to tie-wrap or bungee the swaybar out of the way.

Date: 7OCT2000 Company: FLOWMASTER Product: MUFFLER Model: SERIES 40 Opinion: Excellent! E-mail: fxgonzalf@qwest.net

Details: The combination of a single muffler along with a free flowing cat converter I've noticed some Hp gain and approx. 2 more MPG. Since typical RPM is under 3000 the exhaust scavenging effect is there and the audible makes the old 94 ZJ Limited more fun to drive.

Date: 3OCT2000 Company: Explorer ProComp Product: 2" coil spring lift Model: TJ Opinion: Excellent! E-mail: ross.white@hudsonrci.com

Details: Bought mine for $272 from JC Whitney. Came without instructions, I e-mailed procomp and they had them to me two days later in the mail. Installation took a whole day for the mechanically challenged. It was tight working the old springs out and the new springs in. Got a full two inches lift over stock, front and rear. Ride is good. For the price of a spacer lift, this new spring lift is a bargain!

Date: 1OCT2000 Company: Skyjacker Product: 6" Rock Ready Model: 1996 XJ Cherokee Opinion: Excellent! E-mail: Tbow911@aol.com

Details: This kit may put a hole in your wallet, but it's worth every penny. This kit took a good part of the day and two pit-arms later. If anyone is putting on this kit, you should try to heat up the pit-arm a little bit, it will certainly help a lot.

Date: 28SEP2000 Company: Rancho Product: Rancho RS9000 Adjustable Shocks Model: 1998 TJ Opinion: Excellent! E-mail: kevden106@hotmail.com

Details: Unbelievable!! Setting #1=Cadillac ride (or as close as you can get with a Jeep!), setting #5=dump truck ride(or maybe even harder). Had to call Rancho twice to get the correct part #'s I needed for my lift, the first dweeb told me to measure my stock shocks, then call back. I called 1 hour later and a friendly woman told me what size shocks I needed.

Date: 28SEP2000 Company: Rusty's Off Road Product: 1 3/4" coil spring spacer lift for TJ Model: 1998 TJ Opinion: Excellent! E-mail: kevden106@hotmail.com

Details: Good lift for those who want to keep their jeep very streetable, while adding a little ground clearance for offroading and winter driving. Product came with no instructions, but it was simple to figure out. Install was total of about 4 hours, including beer breaks(lots of beer breaks!). After install I noticed a vibration while accelerating 2nd thru 4th gear. Rusty's recomended a 1" transfer case drop, which also arrived with no instructions. VERY easy to figure out, and even easier to install, though. good product, excellent support, definetely recommend for a daily driver. You will need new shocks, also.

Date: 26SEP2000 Company: Skyjacker Product: 6 inch rock ready kit Model: XJ Opinion: Excellent! E-mail: cherokee_man_1990@yahoo.com

Details: I call it the best lift ever made for an XJ. It came with everything you need and I mean everything. Flexes killer and rides like a dream.

Date: 22SEP2000 Company: Herculiner Product: Herculiner Model: YJ Opinion: Excellent! E-mail: belknap123@yahoo.com

Details: This roll on bed liner is the best thing I've done to prevent rust on my constantly mud soaked YJ. The kit gives you for EVERYTHING you need to prep and install it for $100. All I have to say is KEEP THIS OFF YOUR SKIN! Wear gloves and a long sleeve shirt, believe me, I learned the serious hard way! But, it was worth it anyway.

Date: 14SEP2000 Company: Pacesetter Product: Header Model: TJ Opinion: Excellent! E-mail: toad608@aol.com

Details: Purchased from Summit Racing for $200 and UPSed to my door in 24 less than 2 days. The header is painted mild steel Not stainless steel. PN# 70-1129 (6cyl.) fits newer YJ and TJ and comes with parts and instructions for both. The install was simple except cutting the excess stainless pipe in front of the cat convertor. I would highly recommend a sawzall or die grinder for this. After install on first start up it smoked all the high temp paint off ( I expected that). Also the O2 sensor is moved from the left to right side of engine requiring you to lengthen the harness. Performance is noticably better above 2000 RPM and gas mileage has improved slightly (1-3 mpg). Quadratec also carries Pacesetter headers, but I recommend Summit for better price and shipping time. 4 cylinder (TJ) headers are also available from Pacesetter PN# 70-1138.

Date: 11SEP2000 Company: Rusty's Off Road Product: Rusty's XJ 4.0 Exhaust Sysytem W/ Flowmaster Muffler And Chrome Tip Model: 99 Cherokee XJ Opinion: Excellent! E-mail: KNIGHTENFORCER@AOL.COM

Details: If you want an affordable exhaust system with great perfomance, then visit Rusty's website! Great product! Easy bolt-on (see instructions online) excellent improvement in power and sound!..thanks rusty! Good job! ( Note: combined with Rusty's K&N air filter tube/intake that I've purchased about a year ago, I've noticed better gas mileage and improved power when I press on the accelerator!)

Date: 10SEP2000 Company: Jims Off Road Warehouse Product: Customer service Model: 89 Jeep Comanche Opinion: Excellent! E-mail: JeepXLC@Hotmail.com

Details: I ordered a 3" BDS kit from this place, and to be short and sweet, their customer service was awesome. Kudos to Greg griffith for such excellent customer service! P.S. The kit is awesome too. Go to their "your Jeep pics" page and see my Comanche doing something very articulate with the new BDS kit. This is the site: http://www.jimsoffroadwarehouse.com/userjeep.asp

Date: 7SEP2000 Company: Sma's Off Road Product: front bumper Model: 1989 YJ Opinion: Excellent! E-mail: finnbadjuju@yahoo.com

Details: Excellent front bumper. Well made and durable. Have used it to push full sized trucks and to knock down well placed poles to ease removal from ground. Looks like a prerunner type bumper. Good value.

Date: 5SEP2000 Company: 4WD Hardware Product: YJ fender flare extensions Model: '90 Jeep Wrangler YJ Opinion: Excellent! E-mail: sparkysffd69@yahoo.com

Details: I ordered these extensions from 4WD Hardware, and got them within five days of mailing the order. They were the only place I could find who carries the parts.

Date: 28AUG2000 Company: ARB Product: air lockers Model: TJ Opinion: Excellent! E-mail: rivkev@hotmail.com

Details: These are not a shade-tree mechanic install, but are everything they are rumored to be "the best!". TAKE NOTE: Quality of results will depend on the quality of the installation. Mounted switches in the stereo box of a Tuffy security console- works excellent. Will test these further in Utah this fall. Yes, these are expensive, but the driver has TOTAL control and the effects are nothing short of amazing. Almost scary.

Date: 21AUG2000 Company: Trail Quest Product: Trail Quest Rear Bumper/Tire Carrier Model: '85 CJ7 Opinion: Excellent! E-mail: bhawort@aol.com

Details: I bought this system for $500.00. It is the least expensive, and the highest quality. You can get all kinds of goodies to put on it. It took me 30 minutes to install it. It only took them 15 days to get it to me after I ordered it. Save some money and use Trail Quest, JP magazine rated it as their #1 bumper/carrier combo.

Date: 20AUG2000 Company: Rubicon Express Product: RE 2.5" Extreme Model: 93 YJ 4.0 Opinion: Excellent! E-mail: wcjp@uswest.net

Details: I've had the RE 2.5" Extreme for 5 months now with great results. The suspension has great flex and a good ride. The suspension is a complete kit that only requires an adjustable trac bar. If I had to do it over again I wouldn't have even bothered with the adjustable trac bar. I'd have gone without. I highly recommend this suspension for anyone with a YJ looking to fit 31" tires.

Date: 5AUG2000 Company: Edelbrock Product: Edelbrock Performer Package Model: 1973 CJ-5 Opinion: Excellent! E-mail: frankrisso@yahoo.com

Details: Let me start off by saying that I didn't know too much about engine mods brfore putting this package on my 304. I ordered the cam, non-egr manifold, and 600 cfm carb and put them on with basic tools and little knowledge with in the course of one complete Saturday. The immediate improvement in power, sound and fast starts were amazing. Clearly too much power to be put into a light CJ-5. The carb was great out of the box, just make sure that your rusty acc. cable and foot pedal are reworked or replaced. The only mistake I made was that I ordered a drop base K&N filter which hit the electric choke. I ordered a spacer to put between the filter and carb but I never got it to all line up just right. Overall the best product I have ever put onto a Jeep.

Date: 25JUL2000 Company: Bulletproof Mfg. Product: FF1R bumper w/SOC Model: TJ Opinion: Excellent! E-mail: rivkev@hotmail.com

Details: Just installed the FF1R w/SOC. The product is very well built and fits like a glove. I waited about 4 months to receive it. There were a couple things during install you should note: 1. The drilling template dimensions were NOT accurate. We had to measure and drill our own. 2. I have a Tomken gas tank skid plate, too, and it had to be CUT to accommodate the receiver hitch. Aside from install being less than easy, the bumper is AWESOME. Mine has dual jerry can and hi-lift mounts, too. All look good so far.

Date: 23JUL2000 Company: BDS Product: 3.5" Suspension lift Model: 95 YJ Opinion: Excellent! E-mail: jurmanii@hotmail.com

Details: Installation was easy. Did it in a weekend with hand tools and only me and my dad working on it. The ride is equal to stock and there's room for 33's but I'm only running 31's. Got the kit and shocks for under 600 bucks.

Date: 21JUL2000 Company: ARB/Old Man EMU Product: Old Man Emu TJ lift Model: TJ Opinion: Excellent! E-mail: rivkev@hotmail.com

Details: The 2 in. suspension installed relatively easily and made a noticable difference in quality of ride and handling. I got the heavy application versions to accommodate a winch front and bumper assembly on the back, and it is great. Overall lift was indeed about 2 inches. Makes a good partner for 32's or even 33's.

Date: 16JUL2000 Company: Bullet Proof Mfg Product: Bumpers Model: N/A Opinion: Excellent! E-mail: meyer261@oregonsbest.com

Details: The name says it all,even the shipping box it comes in. this is an excellent product if you are looking for a HEAVY DUTY bumper system for the front and rear. there area number of options, the front can be ordered with different styles of hoops for mounting lights, although IMHO the hoops overwhelm the front end and don't look good, so ordered mine without them. They both can configured with shackles and a hitch. I especially like the rear bumper system for mounting the spare and a hi-lift jack and 2 jerry cans. everything fit just how it was supposed to. Be prepared though for a LONG wait if ordering this setup. my order took 3 months. I would recommend this product, although it is spendy. www.bulletproofmfg.com

Date: 15JUL2000 Company: WARN Product: Warn Hub Conversion for XJ Model: Cherokee Opinion: Excellent! E-mail: JEEP083@aol.com

Details: This kit is very easy to install...the only problem is you need different rotors and they have to be machined...other than that awesome!!!!!

Date: 14JUL2000 Company: Wiggy's Product: sleeping bags Model: N/A Opinion: Excellent! E-mail: rivkev@hotmail.com

Details: If you spend a lot of time outside and are looking for a sleeping bag, check out this company. Perfect for any outdoor activity or to store with your jeep. Stays warm when wet, compressible, light, VERY durable, machine-washable, and just very functional. Highly recommend.

Date: 14JUL2000 Company: Rubicon Express Product: 3" suspension lift with sway bar disconnects Model: 2000 TJ Opinion: Excellent! E-mail: chiros@therink.com

Details: Since putting this lift kit on the highway ride has been fantastic. This past weekend was the first chance to take it on the trails. The place we were able to go amazed us, and much more experienced Jeepers told me the only thing limiting me was my lack of off-road experience - that where I was going was just the tip of the iceberg of where this Jeep would allow me to go. The only complaint is that the sway bars are a bit difficult to re-connect but apparently as they are used more this will become easier.

Date: 8JUL2000 Company: BF Goodrich Product: All Terrain TA KO Model: Cherokee Opinion: Excellent! E-mail: piper@escape.ca

Details: I bought a set of 31x10.5 AT KO's for my XJ. They are awesome. They have the same amount of road noise as my old 205's did but have way better traction. They suck up smaller bumps like washboard nicely as well. I can hardly wait untill winter!

Date: 2JUL2000 Company: Superlift Product: Softride Model: 3.5 lift Opinion: Excellent! E-mail: rquad@worldnet.att.net

Details: I bought and installed this lift in an 89YJ, I thought I'd tell ya all about how it went first of all I'd recomend that you include in your purchase a front U-bolt kit as the stock one will be too short and the time to find this out is not when your instalation is complete. As for the ride it has very decent road manners with a single passenger it is a little stiffer more controlled than stock springs. I have a winch on the front and it handles its weight fine. The whole Jeep settles right down when more people are in the Jeep. I haven't had it off road yet, but I suspect it will do a fine job. Also for those slightly interested in the coil conversion, Superlift is building a lift and it will be available soon.

Date: 24MAY2000 Company: Skyjacker Product: 4" Lift Model: '78 CJ5 Opinion: Excellent! E-mail: backwardsbj@hotmail.com

Details: I am very impressed with the Skyjacker softride suspensions. Back in December I fliped my Jeep end over end and bent my rear driver side spring into a 90 degree about 6" down from the front spring hanger. It took a lot of work but I managed to bend it back to its original shape and now it rides just like it did before. I would recommend these lifts to anyone who is looking for a good tough lift kit.

Date: 24MAY2000 Company: Tera Product: BellyUp/TJ Transfer Case skid plate Model: 97 TJ Opinion: Excellent! E-mail: jeepco@aol.com

Details: Be aware that this kit recommends a 1" body lift and requires a SYE and CV driveshaft. The install is straight forward and only requires 2-3 hours to install providing the body lift and SYE are already installed. This upgrade provided over 2" additional clearance from the stock skid plate. The instructions with regard to the motor mount spacers are a bit vague, but once you get the pinion angles right, you will be pleased with the clean look of thet skid plate. The install requries the use of 1/2" motor mount spacers which may be an issue to those of you using York compressors, but my York fits fine after relocating the cowl support rods.

Date: 24MAY2000 Company: Rhino Product: Rhino Liner Model: '98 TJ Opinion: Excellent! E-mail: ted.cacioppi@cliffordchance.com

Details: After finding some minor rust under the (dirty) carpets of my TJ, I pulled everything, sanded, and got it Rhino lined. I was able to save some money b/c the owner let me use his tools to tear out the seats, console, etc. Major project, but worth it. I actually still have those footman hoops in the bed to tie things down, but they are covered with liner. I've dropped axle shafts, rotors, and heavy tools onto the liner with no effect. I got my Rubicon type rack lined also, since I take it off and toss it in the garage - I've dragged that over pavement with no effect. The liner does transmit heat more than carpets, but not much, and my dog likes the warm spots. This is good stuff.

Date: 24MAY2000 Company: Rubicon Express Product: 3 inch superflex lift Model: '98 Jeep TJ Opinion: Excellent! E-mail: ted.cacioppi@cliffordchance.com

Details: Great lift - plenty of room for 33's, great flex, great ride on and off road at any speed. It seems closer to 4 inches than 3 inches. This is an "all inclusive" lift - all eight control arms, track bar (front) track bar relocator (rear), springs and SLE (I went with an upgrade to the HD output shaft). A lot of money, but cheaper than doing it in pieces over the long term. The flex on this thing is just unreal.

Date: 19MAY2000 Company: Tuffy Product: Security Products for TJ Model: 2000 Wrangler TJ Opinion: Excellent! E-mail: rivkev@hotmail.com

Details: Security stereo console hard to install without removing seats, but very nice. Glove box has finicky tolerances but works great once installed. Rear cargo security lockbox (the HUGE one) is great, but tolerances are tight and you will have to remove ALL rear seat and seatbelt components. Overall, excellent, meticulously detailed, very strong products worth the dollars.

Date: 13MAY2000 Company: Powertrax Product: No Slip locker Model: 95 YJ Opinion: Excellent! E-mail: Mjeeps@aol.com

Details: If you have read my opinion from April 1, 2000 I said that I would write more when I had actually tested the locker off road. Well, I have just returned from 3 straight weekends of wheeling in three different types of terrain. I have tried on a local trail that was very muddy due to heavy rains that has a couple of steep inclines and ditches and streams to cross. The locker worked flawlessly! The tail gunner behind me was impressed being able to see both rear tires spinning. I did not get stuck once and was able to get through a couple of gnarly sections of goo with no problem. The other guys in my group had 32x11.50 MT's, compared to my 31x10.5 AT's and had a tough time. I was also able to try out my newly lockered Jeep in a rockcrawling situation and was able to crawl through plenty of off camber places with one wheel off the ground, and bump up on other crevices with no problem. One guy asked me if I was lockered in the rear because he couldn't hear anything! The final place was at the coast and I could get through the soft, sandy dunes in 2 wheel drive. I am convinced that this locker is terrific!

Date: 12MAY2000 Company: BulletProof Product: FF1 & FF1R Bumpers Model: 98 TJ Opinion: Excellent! E-mail: jeep4freedom@yahoo.com

Details: These are some of the strongest bumpers I've ever seen! They look great and are quite practical as well. The 3/4" shackles can tow anything from anywhere. From Virginia to Utah to California, I get compliments all the time on them. The installation was fairly easy, although they weigh a ton. But mine slid right over the factory mounting holes and bolted right on. I only have one complaint ... the wait to get them. Six weeks is a long time (and I lived only two hours from their factory), but once I saw them on ... I knew it was worth the wait! Check them out at: www.bulletproofmfg.com

Date: 12MAY2000 Company: Steel Horse Product: Locking Hood Latches Model: 98 TJ Opinion: Excellent! E-mail: RIKNIK@AOL.com

Details: The only Steel Horse product I've kept! Contrary to other posts, my latches have performed well, although certain components tend to rust almost immediately (even though mine are black). They are def. a great improvement over the stock rubber latches and perform the second function of holding the hood almost motionless in high winds. While an EXCELLENT rating is a bit too high, a GOOD rating is in order.

Date: 12MAY2000 Company: Xenon Product: Fender Flares Model: 98 TJ Opinion: Excellent! E-mail: RIKNIK@AOL.com

Details: Not the cheapest but definitely the best. Perfect fit, easy and quick to install, very durable. Tested through a Lake Erie winter, 8k trip west w/75 mph+ highway speeds, and Moab sand with flying colors. Will not hesitate to install on next Jeep.

Date: 12MAY2000 Company: Tuffy Product: Stereo Security Console Model: 98 TJ Opinion: Excellent! E-mail: RIKNIK@AOL.com

Details: One of only two products (the other being Xenon fender flares) that FIT my Jeep perfectly the first time, PERFORM as advertised, LOOKS GOOD (I chose the black model for my grey interior), and is definitely built to last! Exceptional quality and a must-have item for anyone who uses their soft top extensively and needs REAL security.

Date: 11MAY2000 Company: Rubicon Express Product: RE 2" spacer lift Model: 99' TJ Opinion: Excellent! E-mail: bell205@aol.com

Details: 2" Spacer lift was easy to install, even for people like me that had no idea how to do it. The instructions could have been a little more detailed. Was missing the T-bone for one of the front shocks and had to re-use the stock one temporarily. RE shipped it out to me 2 day air and was very helpful and friendly about the whole situation. Even sent me some books, calendars, and stickers. Guess they were trying to make it up to me, LOL. For anyone looking to add a mild lift, this kit is the way to go. I recommend purchasing swaybar disconnects with the kit as the stock ones will not fit anymore. Don't wait like I did, I'm temporarily driving with them disconnected and have a poor ride on the street.

Date: 8MAY2000 Company: Canyon City 4x4 Product: Swing away spare/hi-lift/can rack Model: 1998 Jeep TJ Opinion: Excellent! E-mail: lrgreen2@gte.net

Details: This rack is great. Hardest part of the install was the removal of the bolts in the t-gate hinges. This thing is tough and doesn't rattle at all. I have had it in Johnson Valley and at TDS Safari and it took a beating and is still as tight as the first day it was on. All that while carrying a 35x12.50x15 ad 10 gallons of gas.

Date: 4MAY2000 Company: UpWarrior Product: Safari Rack Model: 92 YJ Opinion: Excellent! E-mail: baradm@hotmail.com

Details: I shopped for about a year for the right rack and was extremely pleased with my final choice. I ordered the rack from 4WPW here in Hawaii and it arrived in about a week. When I opened the boxes to inspect the product, it was apparent that this was a solid rack. Installation was straightforward. And it looks great. It is rated at 450lbs plus...while the Olympic is only rated at 150lbs unless you purchase their extra load carrying accessories. I've already carried kayaks, surboards, 2x4's w/ no problems. To see how solid it was, me and a few 200+ pound friends shook, pulled, and 4 of us stood on top of the rack (on the Jeep). This product is SOLID! Highly recommended.

Date: 2MAY2000 Company: Currie Product: Rocker Panels Model: 95 YJ Opinion: Excellent! E-mail: megngrish@yahoo.com

Details: Had to drill the body, but it was worth it. These heavy gauge steel panels cover the full rocker and tie to center body/frame mount. They allow you to use the stock fender flare extension. Haven't "field tested" them yet, but they look great and have given me confidence to try obstacles that I wouldn't attempt before. Also, Currie had great service -- I lost one of the special zinc-black bolts and they mailed me two bolts free of charge.

Date: 2MAY2000 Company: Tomken Product: Protec Rear Bumper w/Receiver Model: 95 YJ Opinion: Excellent! E-mail: megngrish@yahoo.com

Details: Looks great and bolted on easily. Tow-pegs tie to the frame and have been used to pull a 4-Runner over rock and thru mud. I have no lift yet, so I tagged the receiver several times in Moab. No damage except some powder coating scraped off. I also took a hit that would have mashed my rear corner panel if I still had bumperettes -- again, I just scratched the powder coat.

Date: 28APR2000 Company: JKS Product: JKS Quicker Disconnects Model: '94 Cherokee Opinion: Excellent! E-mail: Justins@datuma.com

Details: By far the easiest disconnect on the market and they are quiet, too.

Date: 26APR2000 Company: TeraFlex Product: Quick Disconnects Model: TJ Opinion: Excellent! E-mail: jerami@macromotive.com

Details: These are awesome! The disconnects are well thought out, and work the way they should! Unlike some other ones where you have to remove a section, these just swing up out of the way and attach to the frame with supplied pins. It makes reconnecting them a snap! On my 97 TJ, I had to try several different positions for the passenger-side clevis pin before I found a position where it didn't get bent- other than that, no problems whatsoever! The kit was very complete, even including brake line extensions. The instructions were very detailed with pictures of every step.

Date: 25APR2000 Company: Rubicon Express Product: Extreme 4.5-inch suspension system Model: 87 YJ Opinion: Excellent! E-mail: jason_harsha@adc.com

Details: Rides like a Cadillac. Flexes great. Very complete. The nice folks at RE even gave me $50 bucks off and omitted the quick-disconnects from the kit because I wanted to go with JKS. This system is worth every penny they charge for it and then some.

Date: 23APR2000 Company: Superlift Product: 3.5 Suspension Lift Model: 93 Wrangler Opinion: Excellent! E-mail: zipo@mediaone.net

Details: I ordered the lift from Rocky Mountain Suspension and it arrived in under a week. Everything bolted right up with relativelly no problems. The only problem I had was getting the stock suspension off which was rusted solid. The kit performs excellent on and offroad.

Date: 11APR2000 Company: JL4WD Product: Bumper/spare tire mount Model: Jeep CJ's and Wranglers Opinion: Excellent! E-mail: jeepstud23@hotmail.com

Details: This thing is constructed like it's built for a tank. It bolts to the frame and to the crossmember and makes the Jeep look way custom. I looked at many of these units before deciding on this one, I felt it was the best value for the money. It has a built in air tank, reciever hitch and comes powder coated black. I paid $349 for mine, but it is quite heavy so it cost me $80 to ship (I live in Utah and the bumper comes from the east coast, so it might be cheaper for those of you who live in the east). The bumper does not come with instructions but it's pretty self explanatory, and should you have questions the guys at JL are more than happy to help. By the way, it does not rattle.

Date: 7APR2000 Company: Bestop Product: Bestop Replace-a-top Model: N/A Opinion: Excellent! E-mail: jeepster1220@hotmail.com

Details: Drove 2 hours from Pittsburgh to 4WD Hardware to pick up the top. Was a nice day for a ride. Their showroom is great and the service is top-notch. I've ordered quite a few items from them. The Bestop replace-a-top is great too, and fits perfectly. The only mildly difficult part is fitting the new skins onto the door frames, but in all fairness, it was a cool day so they were harder to stretch. The top looks excellent and was only $289.95 with tinted rear windows. Very highly recommended!

Date: 6APR2000 Company: Old Man Emu Product: OME 2.5" YJ lift Model: '92 YJ Opinion: Excellent! E-mail: pattorres@jps.net

Details: I put the rear hardtop springs on all four corners (have the hardtop and plan on getting a bullbar and winch combo, about 200lbs) and actually got 3.5 inches of lift. My stock suspension had the off-road package with the gas shocks. With the OME kit it now rides even smoother. The lift was just put on and I can't wait to hit the trails and check out the storied articulation. It took me a lot longer to save up enough and a lot of restraint to keep from buying a cheaper lift earlier, but well worth the wait.

Date: 5APR2000 Company: Quadratec Product: Thor Sound Wedge Model: 91 Wrangler Opinion: Excellent! E-mail: Vtbugs@aol.com

Details: Great company. Received as a gift and couldn't be more pleased. The sound wedge itself works wonders. As you all know, there is not a lot of space to put speakers unless you use up other "valuable" space. The highs are clearer, lows are tighter and it sounds darn good!!!!! Well worth the money...and then some!!

Date: 5APR2000 Company: Wrangler N.W. Power Products Product: 175-Amp Alternator Model: '98 TJ 4.0 Opinion: Excellent! E-mail: ted.cacioppi@cliffordchance.com

Details: I wanted to beef up my electrical system becuase of a winch, lights, air pump etc, etc (and possible welding in my future). I put in an Optima yellow top (no room for duals), and shopped for a new alt. I ended up buying a 175-amp unit from Steve at Wrangler N.W. (1-800-962-2616). He was really, really helpful and knows his stuff. I ended up needind a few odds and ends to make it work (upgraded charging cables, Optima side posts, military spec battery terminals) - he had everything I needed (and a bunch of stuff I wanted). It's a direct bolt-in, except that you have to shrink wrap and zip tie your old charging cables up out of the way. I have A/C, and it was very, very hard to wrestle the old unit out and get the new (slightly bigger and much beefier) one in. I eventually unbolted the A/C compressor and moved it around without disconnecting the tubes, and worked from the top. I had to slide it in all backwards and spend an hour rotating it around the right way. I've also heard you can trim the fan shroud and work from under the Jeep. Once it was in the OEM serpentine belt fit fine, I connected all the wires in the right sequence, and fired up the engine - no problems, charged the battery perfectly. Winching is much quicker and easier now - it takes a longer sustained pull to drain out the Optima and it's much faster charging back up. I was concerned about messing with the TJ's electronics, especially because I bought it used with a major aftermarket stereo and a high-tech alarm system, but this was easy and everything works - I just needed metric wrenches/sockets and a lot of patience getting the unit in place.

Date: 2APR2000 Company: Matkins Extreme Product: Frame Model: 76 CJ 7120 Opinion: Excellent! E-mail: jeep-sharon@starpower.net

Details: Frame is done nicely adds a little lift to body. Service is good via phone or E-mail.

Date: 2APR2000 Company: Radical Offroad Product: Phoenix Series front bumper Model: 1998 Jeep Wrangler TJ Opinion: Excellent! E-mail: youngspaintNBody@aol.com

Details: Bumper is awesomely strong w/ built in tow hooks and air tank capability and comes powder-coated, is an excellent platform for any type of winch system and installation is a snap!

Date: 2APR2000 Company: The Wax Shop Product: Black Bumper Cream Model: 1989 Wrangler Opinion: Excellent! E-mail: artkristy@k-online.com

Details: This cream restores color to exterior trim. I used this product on my black hard top and the rubber mud guards on each fender. They look like new and keep their color for up to 6 weeks. Product says after repeated applications the new deep color will stay in. I've only used it twice so far and I am very impressed with the brand new, shiny appearance my Jeep has.

Date: 1APR2000 Company: Powertrax Product: No-Slip locker Model: 95 YJ, Dana 35 rear Opinion: Excellent! E-mail: Mjeeps@aol.com

Details: This is one of the new lockers do-it-yourselfers can do. It is very easy to install and comes with very detailed instructions for your application. On the road, the performance is unreal for a full time locker. Is is very, very quiet except for a soft clunk occasionally on very sharp turns. You do not have to press in the clutch when cornering and you might not even notice it is there. On the way to pick up my Jeep I rode in a friend's CJ5 with a Detroit in the back and it was noisy compared to mine. I will write again when I have tested it more off-road other than the local construction site!

Date: 1APR2000 Company: Rubicon Express Product: 3" Lift Kit Model: 98 XJ Opinion: Excellent! E-mail: PTKAVANAGH@AOL.COM

Details: Improved the XJ's handling on-road as well as off-road. No problem with driveshaft. Great system, a lot for the money.

Date: 31MAR2000 Company: Tomken Product: gas tank skid plate Model: TJ Opinion: Excellent! E-mail: rivkev@hotmail.com

Details: Nice product, very well built, BUT...we had to remove it after it had been installed to cut out about a 4 in. chunk of steel with a torch to prevent rubbing on the rear diff. Cut it out before you install and save time. Why Tomken doesn't spare us the trouble, I don't know.

Date: 18MAR2000 Company: Tuffy Product: Stereo Security Console Model: CJ-7 Opinion: Excellent! E-mail: gavan@udel.edu

Details: The product is excellent, like I expected it to be. Everyone I have talked to loves their products. The big suprise I got was dealing with their customer service department. There was no wait on the phone; I got through to them almost immediately. I got it used, so I needed a couple of brackets. They had no problem supplying them at all. In all respects, an excelent company. If youre going to buy a console, don't buy anywhere else, because you will end up spending your money twice.

Date: 16MAR2000 Company: Centerforce Product: Centerforce II Clutch Model: 79 CJ-5 t-150 Opinion: Excellent! E-mail: etappe1@hotmail.com

Details: Awesome holding power. Pedal pressure lighter than stock. 33's and a built 304 and it hasn't even thought about slipping. You may pay a little more, but is well worth it!

Date: 14MAR2000 Company: Rusty's Off Road Product: 6" lift Model: N/A Opinion: Excellent! E-mail: mudjeeper@yahoo.com

Details: I installed the lift.Everything was simple to put on and fit perfectly. Came with thorough instructions. Any questions were only a phone call away. Rusty answers his own phone. This lift has excellent articulation and flex. My XJ has never looked better.

Date: 13MAR2000 Company: M.O.R.E. Product: Sport Cage Model: TJ Sport Cage Extension Opinion: Excellent! E-mail: ted.cacioppi@cliffordchance.com

Details: I put in Mountain Off-Road's roll cage upgrade over the weekend. I runs from the stock TJ's soundbar forward to the windshield, and down through the drain holes, and has a cross-piece just to the rear of the sun visors. I then bolted on their outrigger kit, and had it welded to the frame. So now my TJ has a six point cage, with four points welded into the frame (the stock cage secures to the frame via the body mounts behind the seat). Given the scope of this project, this was easy - I picked it up from the painter (MORE only ships bare steel), and had it bolted in ready for the welder three hours later, without a single unforseen problem. The soft-top door surrounds and padding fits fine, and I can actually drop the windhsild on the hood much easier than stock - just remove six bolts and the wipers, no need to deal with removing any cage pieces. The directions were very clear, detailed, and easy to follow. The soft-top, sun visors, and window handles all work fine. The welder told me the tubing was standard roll-cage material used by custom and race fabricators. It seems just as solid as can be, I just hope I never have to test it.

Date: 13MAR2000 Company: 4WD Hardware Product: Bestop trailmax seats Model: YJ Opinion: Excellent! E-mail: cengrissei@hotmail.com

Details: Bought two new front seats after my factory seats ripped through the slider. So far the seats are very solid and comfortable. They sit a bit higher than factory seats as the cushions are thicker. The vinyl seats are made from the same material as soft tops. This is the second time I've ordered from 4WD hardware and again received great service from them. I got my order on time and with no problems; I wouldn't hesitate to recommend them. Great product and distributor!

Date: 13MAR2000 Company: Four Wheel Drive Hardware Product: Jeep Parts Model: Mail Order Company Opinion: Excellent! E-mail: cyr@cybertours.com

Details: Been using them for years. Latest experience: I ordered new front spindles on a friday and received them on the following tuesday. Inspection revealed one of the spindles was missing a seal. I called them and the were very apologetic and sent out the seal priority mail and I got it the next day. I have always found them to be friendly and helpful.

Date: 8MAR2000 Company: ARB Product: Air lockers Model: '98 TJ Opinion: Excellent! E-mail: ted.cacioppi@cliffordchance.com

Details: I have them front and rear - awesome! I have only a 2 inch lift and 31-inch All Terrains, but I made it up a 50 degree mud and rock covered hill that people with 33's muds and 4-inch lifts were backing down, even with rear lockers. Even a couple double-locked people with 33's never made it up. Perfect street manners when off, and the pump airs up 31's in less then two minutes each. Only downside - cost.

Date: 8MAR2000 Company: Bulletproof Product: Bumpers/rear tire carrier Model: '98 TJ Opinion: Excellent! E-mail: ted.cacioppi@cliffordchance.com

Details: Once they're on, these are the toughest bumpers out there, I'm very happy now. The rear is a real pain to get on (need to drop the gas tank to get at all the mounting holes), but it is secured to the frame very solidly - I used it to pull a dead full-size Bronco out of the woods the day after I put it on. People ask me about that lower hoop in the front (approach angle), but the hoop provides some steering box protection (maybe tie-rod also). The tire carrier is great, very secure, no rattles, a Firestick fits right behind the tire, even with the 3rd brake light on the carrier, and it has a real good Hi-Lift mount. If you're putting a winch on, do it at the same time as the front bumper, there was no room behind the grill guard to slide it in (I took the front bumper partially off to install a Warn HS9500i with Bulletproof's mounting plate). Spend the extra $90 and get the shackle mounts. I have Tomken's gas tank skid, and I had to get a 3" square notch cut out to be able to put anything in the receiver (can be done after, bumper will fit). Installations: Front- ten minutes need only Torx. Rear: Three hours, need floor jack, lots of sockets, anti-sieze compound (for tire carrier bushing), and a drill for post '97 Wranglers (four 1/2 inch holes in cross member). Winch install: 45 minutes, would have been 20 if I did it when I put the bumper on, need Torx, wrenches, zip-ties. Overall: a bit of a pain to install, but more than worth it.

Date: 7MAR2000 Company: Rough Country Product: Shackle Reverse Model: CJ/YJ Opinion: Excellent! E-mail: GWpumba@aol.com

Details: This kit is killer it is the most complete kit made I have done a couple of shackle reversals with other kits that you have to weld to the frame and they are very cheesy (Warrior). This is a complete bolt on kit it comes with grade 8 bolts and washers and the nut are self locking it takes some time to install because you have to cut the rear spring mounts off but it is very beefy and easy to install you must check you front end for alignment it gives one inch to the wheel base and the handling is so much better.

Date: 6MAR2000 Company: AirAid Product: Poweraid Model: 4.0 Opinion: Excellent! E-mail: sertool@cswnet.com

Details: Added power + 3 miles per gal.

Date: 6MAR2000 Company: Garmin Product: GPS Model: GPS III Plus Opinion: Excellent! E-mail: mcdavitt_fred@bah.com

Details: Jeep Wranglers were not designed to support most electronic equipment. The TJ's near verticle glass surfaces and lack of horizontal steel surfaces minimizes the potential of CB radios and most GPS systems, except one. The GARMIN GPS III Plus works very well, right out of the box, sitting on the very limited dashboard of a TJ. After initialization, the GPS III Plus took a very solid, four satellite fix, and never lost sync for any of the trips we have taken which includes city, mountain fire trail and open desert driving. It's amazing. The unit offers you a choice of six screens from a map to an airplane type display. If you want to get out and hike around, the GPS III Plus will detach from the dashboard and go with you. It is small and only weighs 9 ozs. If you are so inclined, you can hard wire the unit, plus add an external antenna to your Wrangler (I didn't). The GPS III Plus is menu driven and easy to use if you have basic computer knowledge or can actually program your VCR. (Your kids can teach you how to use it). I also tried the Magellan Map 410. It worked well outside of the TJ, but couldn't maintain sync while inside the vehicle with a hard top.

Date: 3MAR2000 Company: ARB Product: Old Man Emu Model: TJ Opinion: Excellent! E-mail: rigglemg@hotmail.com

Details: The ride quality is excellent. Solid manufacturing and packaging. Really a breeze to install. I would like to also compliment Rocky Road Outfitters. I ordered the kit on a Tuesday and received it on Friday. Super-fast shipping, would buy from them again anyday.

Date: 1MAR2000 Company: Many. Product: Xtreme Offroad Inc. Model: TJ Opinion: Excellent! E-mail: Jeep2Deep@cs.com

Details: After purchasing my 1999 TJ it wasn't long before the "improvement process" began. I looked long and hard to find a decent off road store in the Tampa Bay area and finally located an excellent one in Tampa. Xtreme Offroad Inc. has done my lift, tires, rims and lockers with many other endeavors forthcoming. I'm a picky person by nature and have yet to have been disappointed with Rob and the guys at Xtreme. If your looking to modify your rig and need a reliable company to deal with, give them a call. They offer excellent service combined with better pricing than you will find in the catalogs.

Date: 29FEB2000 Company: Off Your Rocker Product: Rocker Panels Model: N/A Opinion: Excellent! E-mail: hhladycz@harbourschool.org

Details: Off Your Rocker fabs the best rocker panels on the market. They fit wheel well to wheel well, have a .50" lip that curls under the body and are extremely durable! The guy who fabs them is really cool and offers good advise. They are definitely worth the money. They were even packaged excellent (unlike Warrior Products poor packaging)no scratches or dings YET! Tell your Jeep friends!

Date: 28FEB2000 Company: IPF Product: IPF Replacement headlights Model: 97 TJ Opinion: Excellent! E-mail: b.smith1@home.com

Details: Everyone knows that Jeep headlights are not very good.These headlights are a must have,especially off-road at night on dusty trails.Out of all the things I have done to my Jeep,these lights are right at the top of the list.

Date: 27FEB2000 Company: Les Schwab Tires Product: Wild Country XRT Model: N/A Opinion: Excellent! E-mail: rivkev@hotmail.com

Details: Les Schwab tires are the mainstay of 4x4 owners throughout most of the Pacific Northwest. Similar tread design as BFG AT, these tires are outstanding for on or off-road travel. Other tread patterns also available for greater or less traction need. I got over 56,000 miles out of the last TWO sets I've owned (including plenty of dirt and gravel and red rock) and will be getting them for my new TJ very soon. Handle very well on pavement, with exceptional performance off-road. Best thing aside from quality and design? The outstanding service Les Schwab tire centers provide. Ask anyone in Oregon or Washington. This is a name to remember when you're shopping for tires.

Date: 26FEB2000 Company: Mopar perfomance Product: Mopar m.p.i. kit Model: 1989 Jeep Wrangler YJ Opinion: Excellent! E-mail: md.hill@gte.net

Details: I have a 4.2L and anyone that has or had one knows the stock carb is a nightmare. Every year I rebuilt the carb. I was looking at all the fuel injection kits that were out there and I went with the Mopar m.p.i. kit. It ran me $1,700. It's not cheap, but it's the best thing I have ever done to this Jeep. The kit is easy to install; you can do it in 2 days. I did it in 3 and took my time doing it. The kit comes with everything you need to install it and the directions are easy to follow. It's really is not as hard as you might think. The power gains are unreal and my MPG has improved a great deal. Off road I have never had a problem with anything. It's like having a 4.0 I have the Jacobs ultra team, Borla header and catback exhaust and with the fuel injection kit, the power is awsome. My neighbor bought a 2000 Jeep Sahara with a 4.0 and we went out for a run and I can walk his on the highway with no problem. It cleans up all of the emissions that are on the stock 4.2 also. If you're thinking that's alot to spend on a 4.2, why not do a conversion to a 4.0 or V8? I thought about that and it sounds alot harder and I would have spent a lot more than $1700. Also, the 4.2 has only 10 less ft pounds of torque without the kit than a 4.0, so with the kit you will have more torque than a 4.0.

Date: 23FEB2000 Company: Milemarker International Product: Milemarker 9,000 lb hydraulic winch Model: 99 Jeep TJ SE Opinion: Excellent! E-mail: seether@eagnet.com

Details: These are really nice people!! Most of all, the service and cooperation you get from Milemarker is above all others. They went out of their way to ensure that I had my winch running optimally on my Jeep. It is a bit more expensive than an electric winch and your engine does have to be running to use it, but it will pull harder, longer, quieter, and cooler than any electric winch will. As far as ruggedness goes, this winch is used by the Army on all their Hummers now. Dig that!!! It runs off of my power steering pump without any mods. All hoses and fittings are provided. I want to say it was the best investment I have made yet into an accessory for my Jeep, and my thanks goes out to all the folks at Milemarker who have made this come to be.

Date: 21FEB2000 Company: Four Wheel Drive Hardware Product: Melvin Model: Warehouse Mail Order Company Opinion: Excellent! E-mail: melvinjensen@hotmail.com

Details: This mail order company (Four Wheel Drive Hardware) is THE BEST! If you own a Jeep, you should have this catalog. Not to be confused with Four Wheel Drive Parts Wholesalers or any other company. This company provides excellent customer service and I have never had any problems with their service. Their service is great and their catalogs are free, they will send you one once you are on their mailing lists, and have an array of aftermarket accessories. I use them mostly and will continue. Give them a try, they are really great. Best customer service around hands down.

Date: 21FEB2000 Company: big dick's sups. Product: 3.5" lift sups. Model: 92 YJ Opinion: Excellent! E-mail: n8siv@compaq.net

Details: I got 4" with this lift handling improved a lot. 32x11.50x15 SSR fit with good clearnce 33 14.50 15 will fit also I'm very happy.

Date: 20FEB2000 Company: Muddyjeep.com Product: TKSilder disconnects Model: 97 TJ Opinion: Excellent! E-mail: cigars4me@webtv.net

Details: After weeks of extended research and phone calls, I came across Tim Kyle and his patent pending TKSliders swaybar disconnects. These are superb compared to any others I have seen. They allow you to disconnect in seconds while still actually remaining connected to the swaybar and frame thus giving you up to 4" of extra articulation. I have installed these on both front and rear of my two 97 TJ's. Great Job Tim!

Date: 14FEB2000 Company: JKS Product: JKS Quicker Disconnects Model: Jeep Grand Cherokee '93 Opinion: Excellent! E-mail: ericshew@excite.com

Details: Easy to install, mine took 30 minutes. Easiest operation I've seen. Clean design, and increases suspension movement about 30%. It's woth it to spend the extra money for a superior product.

Date: 14FEB2000 Company: Pro-Comp Product: 3" ZJ lift Model: 93 Grand Cherokee Opinion: Excellent! E-mail: ericshew@excite.com

Details: This lift is the best thing I've done to my Jeep. Its easy to install, cheap, and improves the ride quality and handling. With 31" tires my Jeep feels solid and handles like a sports car. Worth every penny. Not to mention it flexes like a champ.

Date: 13FEB2000 Company: Firestone Product: Wilderness AT Model: 92 xj ltd Opinion: Excellent! E-mail: JODI_C@msn.com

Details: Last summer I replaced the tires that came on my Jeep with 235/75r15 f/s wilderness at's it originally came with 225/70r15 firehawk ss10's the difference is major; running them at 30 psi it rides like it is on 4 big pillows other than a little road noise with the windows up they are well worth buying for anyone looking to put a good tire on a stock Jeep and not spend a whole lot of cash mine were $270.00 mounted balanced with road hazzard. Off road, the work well as long as your not into mud bogging or rock crawling, snow and ice aren't much of a problem either.

Date: 11FEB2000 Company: Painless Wiring Product: Cirket Boss 7 Model: N/A Opinion: Excellent! E-mail: rigglemg@hotmail.com

Details: Excellent product, Easy to install and works perfect. All the products I have purchased from Painless Performance have been outstanding.

Date: 5FEB2000 Company: Explorer Procomp Product: 2" spring lift Model: 1999 TJ Opinion: Excellent! E-mail: jeepboy50@hotmail.com

Details: After shopping around for a mild lift, I found this to be best. Priced at about $300 it is only $100 more than a typical 2" spacer lift and comes with ES3000 shocks. A Rancho spring lift is $600 for the same amount of lift, but why waste the $300 when Explorer Procomp is a much better lift. Install time took me about 4 hours and was very simple. I am running 31's and have been very satisified with the results. Don't waste your money on spacers cause you don't get that much of a difference. Spend the extra money for the new springs as well.

Date: 1FEB2000 Company: Radio Shack Product: 1000 Watt Power Inverter Model: 94 Grand Cherokee Opinion: Excellent! E-mail: thuechri@globalbiz.net

Details: Great Idea! I installed it on it's own circut, and mounted it under the passengers side of the dash. The major Bonus it, I have a 110vAC Outlet that will run a microwave in my Jeep! Plus the Old Lady likes it for her Hair Dryer. It was actually cheaper than buying the cigarette Lighter Adapter for my Laptop PC!

Date: 28JAN2000 Company: Rancho Product: 2 1/2" lift kit with RS5000 Shocks Model: 1971 Jeep CJ-5 Renegade II Opinion: Excellent! E-mail: poqu99@vci.net

Details: Was surprised to be able to get a lift kit for a '71, was cheaper than OEM. Installed most of it by myself (had friend hold flash light). Everything supplied fit correctly and it looks and works great!! That was the first time I replaced springs or shocks.

Date: 16JAN2000 Company: Garvin Product: Wilderness Rack Model: N/A Opinion: Excellent! E-mail: ltnorma01@aol.com

Details: This is a well built rack. The load area covers the entire top area of the jeep and holds nearly anything you need. This is the only roof rack I have been able to find that you can still lower the top without having to remove the entire rack. Installation is fairly easy, once you decifer the directions... It isn't cheap, but well worth the money.

Date: 27JAN2000 Company: ARB USA Product: Old Man Emu 2" suspension lift Model: 99 Jeep Wrangler Opinion: Excellent! E-mail: JaredJeepers@gateway.net

Details: I recently installed the 2" Old Man Emu suspension lift on my '99 Wrangler along with 32x11.50 BFG Mud Terrains and beleive me, the ride is awesome. I have found that everyone is hung up on the Rubicon Express lifts but they have not ridden in my Jeep. The kit is everything it says and more. I strongly recommend it, it is worth the money.

Date: 25JAN2000 Company: PRO COMP Product: 4" Suspention Lift Model: YJ Opinion: Excellent! E-mail: H_TTC@hotmail.com

Details: For all of you that trash Pro Comp...grow up! Either you screwed up installing the lift, or you don't know what your talking about, or probably both. I installed my kit about 3 wks ago...at first it was very stiff (as with all Sus. Lifts) but after 2-3 wks it has softened quite abit, nearly as good as stock, and I still get a lot of flex and have plenty of room for my 33's. I strongly recommend this product for anyone, but keep in mind, with any suspention lift (other then SOA) your ride will become a little stiffer, but thats part of owning a 4x4, suck it up (and by the way, Rubicon Express uses Pro Comp Springs..,so for everyone that trashes Pro Comp and worships RE, look @ your springs).

Date: 20JAN2000 Company: Hurst Product: Tranny Fluid Model: Wrangler Opinion: Excellent! E-mail: ymiazombie@hotmail.com

Details: Incredible...I have never noticed that much of a difference just by changing tranny fluid. I will be using Hurst from now on. I wish I would have used this when I had my '68 Cuda running.

Date: 11JAN2000 Company: Trailmaster Product: 3" Body Lift Kit Model: 87-91 YJ Opinion: Excellent! E-mail: yjlaredo89@hotmail.com

Details: Very easy to install yourself. Easy-to-follow instuctions, could use some pictures though. Just be very careful. Before you buy, check to see if your body mount bolts will come off. If they are so rusted that they snap off, you have serious problems.

Date: 10JAN2000 Company: Firestik Product: Firestik Jeep Hood Mount Model: TJ Opinion: Excellent! E-mail: rigglemg@hotmail.com

Details: I ordered the Firestik Jeep Hood mount from my local distributor. I only have two things that I see can use improvement. First, there was no parts list. Second, in order for the mount to be level, it must be bent 5 to 8 degrees. This is not a big deal if you use a vise, just time consuming. Overall I am very happy with the product.

Date: 1JAN2000 Company: Rusty's Off-Road Product: Front tow hooks Model: Comanche 1992 Opinion: Excellent! E-mail: Vag4450H@aol.com

Details: Front tow hook kit is suitable for use on Comanche or Cherokee. Installation was straight forward. Kit is well engineered, very strong, and custom looking. Rusty was very helpful over the phone when ordering.

Date: 29DEC1999 Company: Warn Product: HS9500I Model: 99 TJ Opinion: Excellent! E-mail: mark.mcmakin@tds.net

Details: I purchased this winch from 4Wheel Parts Wholesalers about 4 months ago, I have been very impressed, it has worked flawlessly. I also got a great deal on it, less than catalog price and got a free accessory kit.

Date: 18DEC1999 Company: Meineke? Product: FLO-PRO Muffler Model: 1993 XJ Opinion: Excellent! E-mail: upperoom@hotmail.com

Details: I had a REALLY bad experience at Air, Muffler, Brake City here in Tampa, FL. I ended having them completely cut off the entire exhaust system! (You don't know what loud is until you hear a 4.0 w/o anything but a header.) Needless to say, the Flo-Pro muffler w/ a 2.5" tailpipe added definite power and a nice sound. I don't know the manufacturer, but I know Meineke has it. It was also cheaper than the Flowmaster that I had stripped off.

Date: 16DEC1999 Company: BFGoodrich Product: BFG 33x12.50x15 AT/KOs Model: 33x12.50x15 AT/KOs Opinion: Excellent! E-mail: CodemanTTC@hotmail.com

Details: These tires are AWESOME. I just put a Pro Comp 4in lift on (its great 2) and then bought these tires. They work great both on the rocks and in the mud. And they emit almost no sound on the road. I don't even need to air down on near vertical ascents! BUY THESE TIRES!

Date: 16DEC1999 Company: Endelbrock Corp. Product: Endelbrock performer package Model: #2131 intake manifold , #2132 cam /lifters ,#1405 Carb Opinion: Excellent! E-mail: savagetaylor@hotmail.com

Details: Installed this package on a freshly rebuilt 304 V-8 along with a Holley electric fuel pump & new Hedman headders, WOW! that's how to wake up a motor, power everywhere!

Date: 10DEC1999 Company: Mickey Thompson Product: Baja Claw Model: 33x13.5x15 Opinion: Excellent! E-mail: wrenchwench@webtv.net

Details: At first, I was a little reluctant about buying these. They are a brand new tire and I hadn't heard any testimonials, but I had read 2 articles on them and both liked the tires. So I shelled out 700 bucks for a set, and after using them hard off-road for about 3 months now, I can say that it was money well spent! They grip extremely well in rocky areas and dirt. They have good floatation in sand as well. Although I haven't had them in mud yet, I'm sure they would do great. The sidewalls seem to be very tough. On 3 seperate occasions now, I thought for sure I was going to rip through the sidewall while driving against large, sharp rocks. The tires pulled through with out so much as a gouge! They do howl on the freeway, but it's not too bad. I personally like the way they sound! Well worth the money!

Date: 8DEC1999 Company: best top Product: door striker plates Model: 88 wrangler Opinion: Excellent! E-mail: cengrissei@hotmail.com

Details: I bought hard doors for my Wrangler, but they were off a CJ7 and had slide style door latches. I called Bestop to order a pair of the striker plates that bolt to the door sill to catch the latch, and they sent them to me free of charge! I was astounded. Great customer service, if you ask me. The parts made it to me in about 3 days.

Date: 4DEC1999 Company: Garvin Indistries Product: Expedition rack Model: 99 jeep wrangler Opinion: Excellent! E-mail: seether@eagnet.com

Details: This rack is the bomb!!! You have to go to the Garvin Industries' web site to find a distributor, and my distributor was not that good on customer service. They are in Marietta, GA. that is all I will say!! Anyways, the rack is a must if you have a hard top or even a soft top like me for the cargo room on large camping trips. It still allows you to use your soft top functionally. The arms arent attached to the body in the rear for supporting weight, they are attached to the frame! About the weight it can hold, ask yourself this, how good are your springs and shocks??? I will have a picture shortly in the show and tell section to show it to you.

Date: 4DEC1999 Company: Tractech Product: Detroit C Locker Model: 99 Jeep Wrangler Opinion: Excellent! E-mail: seether@eagnet.com

Details: This product was bought from Leon Rosser Jeep (great bunch of people!). It was very easily installed and it doesn't make all the clicking noises everyone says it does. The handling difference will be noticed right away (easy to adapt to). The trail difference is needed if you are going offroad!!! This is truly an amazing product and it was well worth every penny I spent on it, which wasn't that expensive to begin with. stay tuned for my EZ locker install.

Date: 25NOV1999 Company: Surco Inc Product: Surco Safari Rack Model: '92 XJ Opinion: Excellent! E-mail: lecomptej@usa.net

Details: All safari racks are kinda expensive, but this is one of the cheapest and it works flawlessly. The mounts hold tightly, no vibration or movement on top of my Jeep, and I've stood on top of it with two of my friends with no warping or bending!

Date: 24NOV1999 Company: Dick Cepek Product: Dick Cepek Model: Mail Order Service Opinion: Excellent! E-mail: timbuddha@aol.com

Details: This company has the best mail order customer service of any that I have dealt with. I ordered shackles and body mounts from them and they were at me house within two days which is amazing. The staff is really knowledgable and helpful. Buy from them! They will take the time to talk to you and to help you with your decision.

Date: 24NOV1999 Company: Teraflex Product: 3 inch Suspension System Model: 97 TJ Opinion: Excellent! E-mail: jperry@gtbeta.org

Details: Great product...great quality. I decided to go with the complete system which includes the swaybar disconnects and adjustable control/flex arms. The product did take a while to install...it is definately a weekend project. Teraflex does, however, have an installation video to assist you. Installation would have been easier if I got the video before I installed it! I have had no problems and no driveline vibrations. With my new 33/12.50 BFG AT/KO, the jeep sits at a perfect height for both commuting and off- roading. A MUST BUY FOR ALL JEEP OWNERS!

Date: 18NOV1999 Company: Rubicon Express Product: 2" Spring Spacer Lift Model: 98' TJ Sahara Opinion: Excellent! E-mail: dsimes@zdnetmail.com

Details: For $200 this lift w/ shocks is hard to beat. I don't have to worry about the front tires scrubbing the fender lips anymore. I have a 5spd w/ Dana 44 rear and I definately didn't want vibration so I got the RE pinion bolt kit for $35. I have no vibration at all and I didn't have to drop the transfer case either. The shocks that come with the kit are a tad stiffer. All the spacers are the same size. RE should have made rear spacers 1/2" shorter to help level out the vehicle. Even from the factory, the rear sits higher. A bag of cement is a quick fix though.

Date: 16NOV1999 Company: BFG Product: All Terrain (A/T) KO Model: 30x9.50x15C Opinion: Excellent! E-mail: beccadad@msn.com

Details: Got the tires about one month ago, and so far the difference is LARGE, great traction off road, dirt, mud, loose rock. Road traction is also outstanding, and looks are great! I had Goodyear Wranglers (wimp tire). The only problem is with the new side tread block you get a little rub on the leaf spring shackle if you turn the wheel fully to lock, but it's not bad and if you stop just short of full lock it will not do it.

Date: 10NOV1999 Company: Pioneer Product: In dash reciever/cd player Model: 99 TJ Wrangler Opinion: Excellent! E-mail: Skippy@gotmail.com

Details: What a difference. Great sound and great looks for very little dough. Took about two hours to install ( I'm picky ). Color is a little off from factory, but trade off is well worth it. I really like this unit for two reasons, right out of the box peak is 45watt per channel so stock speakers sound OK. Has unique feature that allows only bass to rear speakes while fronts get higher tones. Sound is awesome, can't wait to replace speakers. Also don't let dealer fool you this won't void warranty since it plugs not splices in.

Date: 10NOV1999 Company: Pirelli Product: Scorpion A/T's Model: 99 TJ Wrangler Opinion: Excellent! E-mail: Skippy@gotmail.com

Details: I told you I would soon have 31's (read take it or leave it 2" Tomken Machine lift)! I've acctually had the tires since I put the lift in but wanted to see how they worked before I wrote about them. I love these tires! Nobody but nobody believes that they are really Pirelli's. They have minimal road noise, work great in the rain ( at highway speeds I might add) and recently went wheelin' with the Tri-State Stump Jumpers. These guys are nuts! Steep hill climbs, thich brush, huge drop-offs and unlike the swamper equiped Jeeps I didn't spin once, or have to back down for a second try. I also am most likely the only one in the state that has these. Very cool.

Date: 8NOV1999 Company: Bestop Product: Trail Max Classic Seats Model: CJ Opinion: Excellent! E-mail: INVISIBLESOLDIER@yahoo.com

Details: Excellent seats, comfortable and sylish. Great off road seat with a classic look, WILL NOT fall apart!

Date: 4NOV1999 Company: Pro Comp Product: 4in Suspention Lift Model: 1991 YJ Wrangler Opinion: Excellent! E-mail: CodemanTTC@hotmail.com

Details: GREAT KIT. GREAT price. Very easy installation. Rides better then before.

Date: 3NOV1999 Company: Dupi Color Product: Bed Liner Model: 1995 YJ Opinion: Excellent! E-mail: ftymc@ibm.net

Details: I didn't have the money to get someone to spray my Jeep. So I went to a local Autozone and bought some spray bedliner. This stuff works great and looks just like a pro did it. I used about 5 cans to do it and it cost me like 30 bucks.. One hint I learned...Use a well-ventalated area!! :)

Date: 3NOV1999 Company: Hedman Product: 304 V-8 Headers Model: CJ-5 Opinion: Excellent! E-mail: Jbakusa@netscape.net

Details: I got the header from 4 Wheel Drive Hardware and am very impressed by them. They have a extremely impressive affect on performance, and the engine sound is also greatly improved. I only wished I waited a few more months since they have now come out with stainless ones.

Date: 28OCT1999 Company: Yokohama Product: Geolander MT's Model: 4 kick-ass tires Opinion: Excellent! E-mail: pughj@dnb.com

Details: These tires are sweet. Quiet on the road and loud as hell OFF. They have great traction in the rain also. And will go through the mud everywhere. A must have!

Date: 26OCT1999 Company: Bridgestone Product: Dueler M/T w/ uni-T Model: 32X11.50-15 Opinion: Excellent! E-mail: crazyhorse@tamu.edu

Details: I have had these tires on my '94 YJ for about 15,000 miles now and I've driven across the country with them twice. Wear and noise is minimal, off road performance is simply OUTSTANDING (mud and rocks), and they are mean looking tires. Where guys with 35" BFG M/Ts have gotten stuck, I've charged right through. They are the BEST all round tire on the market, and 40-50,000 miles out of them is not out of the question. I can't understand why I don't see them more often. They're one of the best kept secrets in tires.

Date: 19OCT1999 Company: Peak Performance Product: Herculiner Model: Comanche Opinion: Excellent! E-mail: jmessin1@stevens-tech.edu

Details: This stuff is great! For $100 I got a bed liner that is very rugged and comparible to the professional sprayed in ones. Plus, you can find it a K-mart, marking it pretty easy to get your hands on. One tip though, USE HEAVY DUTY GLOVES. I used latex gloves that accidentally tore. It's gonna take a couple days to get this stuff off even with harsh solvents. If the durability of the stuff I got on my hands is any indication of the toughness of the stuff in my bed, the liner should last much longer then my freaken truck!

Date: 12OCT1999 Company: Weber Product: Weber carburetor Model: 2-barrel Opinion: Excellent! E-mail: servowayne@hotmail.com

Details: I own an '87 YJ Wrangler, this Jeep was sick, and with only 30,000 on a new motor, I new something was wrong. After doing some surfing, I found out about a devil of a thing called a carter bbd with stepper motor. Well, first I replaced the stock ignition with a Jacobs ignition system, hey that helped a bunch {and no closed loop crap]. Next I removed about 30 pounds of emissions garbage lines, switches, hoses, valves, all of it. Next I installed the new Weber, and man someone just turned on the light. The Jeep now runs like it did just on the first barrel, get the RPM's to 2500 floor it and the tires will break loose when you hit second gear. I would highly recommend these mods to anyone with a sick six. P.S. You cannot remove the computer, because it controls the wipers on Jeeps with delayed wipers. {Ii had to dig it out of the trash the next day because it rained}. With the converter still on, the Jeep will now pass most states emission tests, but would not come close before.

Date: 11OCT1999 Company: Trans-Go Product: shift improver kit Model: TF518 Opinion: Excellent! E-mail: summers@innernet.net

Details: Installed a shift improver kit in my torqueflite auto tranny behind a swapped-in 304 in my '88 YJ. The kit comes with a video that is very helpful (I had never worked on an automatic in my life). You get several options for firmness of shifts from light to neck-snapping. I opted for the lightest shift and am going to redo it for the firmer shifts. It also allows for downshifting to first gear at any speed (useful in 'wheelin') Ordered from www.performancess.com - excellent, quick service. If you can change your own oil then you can install this kit in your tranny.

Date: 6OCT1999 Company: BF Goodrich Product: BF Goodrich All Terrain Model: 31x10.5R15 Opinion: Excellent! E-mail: JMarleau@excite.com

Details: I had these on my '92 YJ for about 2.5 years. They were very quiet, durable and most importantly, great in snow. It was only after purchacing the comparable tire from Goodyear that realized what an awesome tire the BFG was. I had twice the traction with 10-percent of the tread with the BFG as I do with a new Goodyear (so it seems). Don't get me wrong, I like Goodyear. It is just that the BFG AT was freakeshly talented.

Date: 2OCT1999 Company: Rusty's Off-Road Product: TJ Lift Kit Model: 3" TJ Lift Opinion: Excellent! E-mail: thane@team3.net

Details: I ordered a lift kit from Rusty awhile back, but there was a mix up in getting the whole lift at the same time. When I finally received it all and had it installed I was very impressed. I ordered the front and rear adjustable track bars with my kit. I am very happy that I made this choice. Rusty is a great guy to work with. He went above and beyond the call of duty to get my kit together for me. If you are on a budget and want a great lift for your TJ give Rusty a call.

Date: 2OCT1999 Company: M.O.R.E. Product: Bomb Proof Motor Mounts Model: CJ Opinion: Excellent! E-mail: dave7986@aol.com

Details: Mountain Off-Road Engineering (M.O.R.E.) manufacture an engine mount to bolt a small block Chevy into a '72-86 CJ-5 CJ-7 CJ-8. The M.O.R.E. part # for these mounts is JM200. The mounts come unpainted. The mounts position the small block Chevy engine in a very good location. There is room to use a long version small block Chevy water pump, and the large size HEI distributor. In my installation, I was required to use 3/8" spacer washers between the CJ frame and the motor mounts. I think my frame is not to factory spec, could be bent some. I have installed a modified Ford 2WD T-18 and Dana 20 transfer case. My drive shaft lenghts have not changed.

Date: 29SEP1999 Company: H&R (thru Performance Products) Product: 1" lift Sport Springs Model: '98 TJ Wrangler (don't recall model #) Opinion: Excellent! E-mail: BrewJeep@aol.com

Details: Excellent progressive coil springs if you're after a mild lift.  The Performance Products catalog claimed a 1" lift, but I saw 1.25" lift in the front and about 1.4"  in the rear over the standard OEM springs.  I've had them in for 8 months now with virtually no sag. I've got the Dana M44-3 rear axle and 5-speed tranny and have had no vibration at all.  Ride with the H&R's is a little stiffer than stock due to the higher spring rates, but bottoming is greatly reduced.  Cornering is about the same as stock.  The stiffer springs seem to offset the increase in ride height. Although the H&R springs do not come with instructions, installation was easy.  Just be sure to have the proper Torx wrenches and sockets handy. Great companion to a set of 31x10.50s!!!

Date: 18SEP1999 Company: Durango 4x4 Outfitters Product: Rocker Panel Protectors Model: For '97 TJ Opinion: Excellent! E-mail: twright98@yahoo.com

Details: I purchased these after seeing them on my friends' YJ. Very durable, excellent quality, mounted in less than 1 hour! They come in black powdercoat or stainless for a little extra. Recommend the stainless mounting hardware. Check them out at durango4x4.com. Great customer service.

Date: 13SEP1999 Company: M.I.T Product: NP231 Transfer Case Slip Yoke Conversion Kit/CV dirveshaft Model: 98 TJ Opinion: Excellent! E-mail: million@spawar.navy.mil

Details:  hile installing the RE 3" lift in my TJ, the notion of lowering my transfer case to eliminate rear drive shaft vibration really didn't make much sense to me.  (The whole purpose of the lift is to gain ground clearance, and add articulation. It felt like 2 steps forward and 1 step back.)  So after reading about it in various magazines I gave the guys/gal at M.I.T a call, and they had what has turned out to be the perfect solution. (For me anyway)  Their Slip Yoke Conversion Kit along with a CV Driveshaft, not only completely eliminated any vibration, but also allows for better articulation, also if disconnecting the rear driveshaft becomes necessary (due to breakage) It can now be accomplished without losing the fluid in your transfer case, which you'll need to get home!!  I highly recommend this product, and M.I.T, to anyone looking for a solution to this problem and any other driveline problem you may encounter.  Their customer service is awesome, and they will go to great lengths to help you out, even over the phone.

Date: 4SEP1999 Company: Bestop/Steelhorse Product: Full soft doors/Mirror relocation bkts Model: 99 TJ Opinion: Excellent! E-mail: skippy@gotmail.com

Details: I waited five weeks for these doors from Quadratec, then got them in five days from Savanah Jones. The doors look great and fit nice not to mention make me look cool as hell. Only had to adjust one stop (driver's side) and, use one bushing (passengers side). No, your eyes don't decieve you I am writing a good thing about Steelhorse, these mirror brackets are great. I had mine painted to match my Jeep and in less then ten minutes had them both on. Only minor mods to the washers (not big enough to let the mirror stud through), so I rounded them out with a file.

Date: 3SEP1999 Company: Bulletproof Manufacturing Product: FF1 and FF1R with Swing-Out Tire Carrier, hi-lift,2xJerry cans, etc. Model: 1993 YJ Opinion: Excellent! E-mail: dfisher@epri.com

Details: These Bulletproof Bumpers are the best aftermarket product that I've invested in so far. They are built truly to their name. Their customer service is top-notch and very friendly. Doug, Dave, Denise and the rest of their crew in Goleta, California Set me up with what I feel are the best and strongest bumpers on the market. Check out their guarantee!! If you want some Rubicon ready and serious rock crawling bumpers that look great, then check out Bulletproof Manufacturing. They're worth the wait!!

Date: 2SEP1999 Company: Rubicon Express Product: Rubicon Express 2" lift Model: 1999 Wrangler TJ Opinion: Excellent! E-mail: johnp7@flash.net

Details: Excellent product, ride and handling almost as good as stock, did need to lower T-case, used Rubicon Express kit also worked great, no bad vibes.

Date: 2SEP1999 Company: Combustion Tech. Product: Direct Hits Model: Commanche 2.8L Opinion: Excellent! E-mail: jmessin1@stevens-tech.edu

Details: Though the Direct Hits didn't turn my dinky 2.8L V6 into a high-performance monster, they helped it out alot.  They've provided better milage and a boost in power with a very descent price and an easy install.  The gain in power is most notable at the higher end around 3rd gear and up.  Also, shifting seems to have become much smoother all around.  A definate must for anyone who's looking for an easy cheap boost in their ignition's performance.

Date: 1SEP1999 Company: HiLift Jack Co. Product: HiLift Jack Model: 48" offroaders' model Opinion: Excellent! E-mail: Kmndobnny@uss.net

Details: If you're wondering where to start with your Jeep buildup, and you're new to the offroading game...This is the do-it-all offroaders' tool! You can winch with it, clamp with it, jack with it, pry with it, bridge with it, get a strength-building/aerobic workout by using it(LOL), brace a bent tierod with the handle, use the handle as a breaker bar, 100 other uses...only an imagination and some simple accessories required. It has saved my bacon a few times, and is ALOT cheaper than a winch. A definite must-have for anyone heading off the beaten path. I even used it just a couple of days ago to remove a stubborn trailer ball from my receiver hitch. Just keep it well-lubed with water-resistant boat-trailer wheelbearing grease, and cover it when not in use, if possible. I also got so stuck once that 4 Jeeps combined couldn't pull me out. With just a little jacking and filling, I was soon moving again.

Date: 30AUG1999 Company: Tractech Product: EZ locker Model: N/A Opinion: Excellent! E-mail: boldhomer@hotmail.com

Details: After reading all of the other postings, I just couldn't believe that no one has recommended these.  I have have them in both pumpkins.  The front one took two hours to put in and the rear was half of that.  And at only $500 for the PAIR to get fully locked up, there is no cheaper or better way to drasticaly improve your Jeep's traction.  Tip:  Save your money and install them yourself.

Date: 29AUG1999 Company: Rubicon Express (I think) Product: Hand Throttle Model: Universal Fit Opinion: Excellent! E-mail: tmdoumit@kalama.com

Details: Have you people heard about this thing called a hand throttle from Rubicon Express?? They have lots of cool stuff, but this is way overpriced at about $30 before shipping...now you can make this thing for under $10 with a trip to your local bike shop and it works just like the one in the magazines...just be sure you have atleast 7 feet of cable (for TJ's). It is a simple install, and it really works great! So far it's the best cheap improvement I've made!! It's an excellent add-on, but save your money and make your own...because it's exactly the same thing except 1 or 2 pieces that can be improvised easily during install.

Date: 29AUG1999 Company: Warn Product: M8000 Winch Model: CJ-5 Opinion: Excellent! E-mail: MAHancock@aol.com

Details: As with everything else that I've seen from Warn, fit and finish are top notch. The winch seems to be more resistant to corrosion and better built than anything I've seen from Ramsey or Superwinch. This winch and the rest of the Warn winches went through a major upgrade this year that improved line speed and reliability, and prices actually stayed pretty much the same - a real credit to the company. Warn will always be my only choice for winches.

Date: 25AUG1999 Company: Four Wheel Drive Hardware Product: Jeep 4 x 4 Performance Handbook Model: N/A Opinion: Excellent! E-mail: smg@blazenet.net

Details: This book provides detail explanations of common mods. Pro's, Con's and how it's done. Great for anyone who is building a Jeep. Roll cages to tire pressure...it's in there.

Date: 19AUG1999 Company: THOR Product: thor soundwedge speaker boxes Model: 89 wrangler sahara Opinion: Excellent! E-mail: Jeepdreamn@aol.com

Details: The Thor Soundwedge speaker boxes are great!  The speakers are positioned between the rollbar and the rear wheel well, and that is just the right place to get the surround sound effect from the driver's seat.  I also found that the speakers now deliver more bass than they used to becuase they are in a better position.  The price, I thought was a little steep ($99.00 for the boxes only), but I soon found that they are well worth the price!  The only thing I suggest is to get a good set of 6x9's to place in the boxes.  Don't buy expensive boxes and then cheap speakers - your money might as well have been burned!  By the way, installation only took about 20 minutes and that included taking the speakers out of the old speaker boxes they were in!  Great product!

Date: 19AUG1999 Company: Wet Okole Product: Custom Seat Covers Model: 95 YJ Opinion: Excellent! E-mail: megngrish@yahoo.com

Details: The custom fronts were a bit expensive, but worth it.  They look great and repel water nicely.  I still have to towel them dry after a soaker, and the outer foam and stitching retain enough H2O to dampen your pants, but they dry very fast.  I bought all black and they still stay cool after a day in the sun -- big improvement over vinyl.  Splurge for the customs though -- I bought a universal (cheaper) cover for the fold & tumble, and the one-piece with lycra sides/rear just looks like a seat cover while the custom fronts look more like custom upholstery.

Date: 19AUG1999 Company: M.O.R.E. Product: 1" body lift Model: N/A Opinion: Excellent! E-mail: abarkley24@aol.com

Details: Very easy to install for a first timer.  oOly took me 3.5 hours by myself. I've had nothing but positive remarks from everyone whose seen it.

Date: 15AUG1999 Company: Rubicon Express Product: Rubicon Express Spring Over Conv. Model: 95 YJ Opinion: Excellent! E-mail: fourx424@yahoo.com

Details: If you are looking for great articultion and still have a stable hwy ride,this is what you want.It took about 10 hours but is worth it.There is welding involved so be warned.I also went with the RE tailshaft slip yoke eliminator and RE extended driveshaft.To me it is a more stable ride than stock.I dont have any drive line vibrations at all...E-mail if you have any questions.

Date: 13AUG1999 Company: Rusty's Off Road Product: 3-inch suspension lift Model: Jeep TJ Opinion: Excellent! E-mail: brulej@aol.com

Details: I installed my lift a few weeks ago, and have since been on a couple of trail runs.  I thought my TJ was impressive before the lift, now I can hardly believe it!  Rusty is a great guy who will work with you to get you what you need for your Jeep.  We put together a customized kit, and it performs great, and a great price.  To buy what I have from any other company would have cost me much more, and probably wouldn't perform as well.  On road performance feels as close to stock as you can get in a lifted vehicle.  Off-road, with sway bars disconnected, the axle droop is excellent! Most lift manufactures produce very good products, and many of them are comparable on, and off road.  That being the case, save yourself some money, help out a small business, and a great guy...get Rusty!

Date: 13AUG1999 Company: All J Products Product: Boulder Bars Model: All TJ's, CJ's, and YJ's Opinion: Excellent! E-mail: brulej@aol.com

Details: I purchased a set of Boulder Bars for my '98 TJ a couple of months ago.  I installed them alone, but it would have been helpful to have another person there.  They are very strong, and I often times find myself resting on them, then sliding off the rock.  They also can be used as a step.  They attach to the frame of the Jeep, and therefore do not reduce your ground clearance at all.  The finish is black powder coat (I think), and can be very easily touched up with a rattle can.  I highly recommend them with no reservations!

Date: 5AUG1999 Company: Metal Made Rite Product: Revolver Shackles Model: 1984 CJ-7 Opinion: Excellent! E-mail: arieno@arctic.net

Details: Greetings from Alaska, I'm currently running the first "production" set of Revolver Shackles on my '84 CJ-7, in conjunction with a TrailMaster 4" lift, and 1" M.O.R.E. body lift. With 33" BFG MT's, I earned a score of 1200 on the 20 degree RTI ramp! Mind you, this is a "spring under" Jeep! Revolver Shackles are an outstanding addition to ANY leaf spring vehicle!  And...for the Gonzo crowd, they WILL work with shackle reversals or sprung over vehicles too. You'll need longer shocks and brake lines, and in some cases a rear CV driveshaft, but the results are outstanding.  Nice and stable on the road with outstanding articulation off road.  Who needs a spring over?  Not me!  I can and do go every where the SOA converted Jeeps go, and with more stablilty. You'll amaze those guys! At around $530.00 with shipping, they aren't cheap, but are bulletproof and well worth the money.  I'll never go back to conventional shackles!

Date: 5AUG1999 Company: Hella Product: Black Magic Model: Driving Lamps Opinion: Excellent! E-mail: mbrannon@ee.net

Details: These lights are the greatest. They are easy to install and look great. I love them. They light up the road great.

Date: 4AUG1999 Company: Rusty' Off Road Product: Rusty's Air Tube With K&N Filter Model: Cherokee XJ Opinion: Excellent! E-mail: ACEMEGS@AOL.COM

Details: Great performance, easy bolt on, saves time and money...definitely recommended!

Date: 4AUG1999 Company: TurboCity Product: Thermostat Model: '94 Wrangler Opinion: Excellent! E-mail: jeepnutt@hotmail.com

Details: I read an earlier opinion of TurboCity's hi-flow 160 degree thermostat and completely agree with the post.  I was a little short on money and replacing my radiator just wasn't an option, so I decided to give the thermostat a try.  On the trail the jeep stayed very cool and not once did I get nervous about over-heating.  This was quite some time ago and I still havn't changed the radiator (but soon!).

Date: 3AUG1999 Company: Teraflex Product: Swaybar QD's Model: 97 TJ Opinion: Excellent! E-mail: george5295@aol.com

Details: By far the best-designed Quick Disconnects I've seen.  Quiet, very strong, grease fittings and they attach to the vehicle's frame when disconnected so you don't need to bungie them out of the way. A steal.

Date: 2AUG1999 Company: Sun Performance Product: Rocker Panel Guards Model: CJ-7 Opinion: Excellent! E-mail: todherman@jps.net

Details: After looking at several rocker panel guards, I finally settled on the Sun Performance guards because of their complete coverage - both top side and below. On top, the guards do not have the "notch" common on other CJ guards behind the front fender.  Rather, these guards completely cover the side panel between both fenders.  On bottom, the guards extend about 6" under the body the entire length between the front and rear fenders as well. The 3/16" steel guards are held in place with 10 fasteners each.  All of the hardware and simple instructions were included.  Just add drill and common sense...

Date: 2AUG1999 Company: Herculiner Product: Herculiner Model: 1978 CJ5 Opinion: Excellent! E-mail: pachary@yahoo.com

Details: Herculiner seems to live up to everything they claim.  The product went on very easily if you follow the instructions.  My tub was heavily pitted and had numerous holes, but the Herculiner hid everything including pop riveted repair patches.  Just about the best 100 bucks I've spent. We'll see how it holds up, but I am very optimistic.